The Ermak Power-Bend Falcon 3100-100 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 3100-100: 3,100 mm bending length, 100 Ton, 7.5 kW motor, 200 mm/s approach, 800 mm X travel, 6,786 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 6,786 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 3,100 mm (122 in) |
| Bending Power | 100 Ton (110 US tons) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Y Rapid Speed | 200 mm/s (7.87 in/s) |
| Y Working Speed | 9.5 mm/s (0.37 in/s) |
| Y Return Speed | 155 mm/s (6.1 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 150 L (39.6 US gal) |
| Motor Power | 7.5 kW (10.1 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 4,970 mm (195.7 in) |
| Height | 2,550 mm (100.4 in) |
| Width | 2,480 mm (97.6 in) |
| Machine Weight | 6,786 kg (14,960 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 3100-100 is estimated between $47,500 and $84,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $736 / month.
Yes, the bending length is 3,100 mm. The columns are 2,600 mm apart, so a part of full length cannot pass back between them and its flange depth is limited by the 410 mm throat.
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 3100-100 is estimated between $47,500 and $84,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $736 / month.
Ermak's current table follows this model with the Power-Bend Falcon 3100-175, which weighs 9,086 kg and has a 15 kW motor and a 200 L tank. Its rapid approach is 180 mm/s.
A motorized two-axis gauge, X and R, with 2 finger blocks. X travels 800 mm at 500 mm/s and R travels 250 mm at 350 mm/s. Pneumatic rear supports are an option.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.