The Ermak Power-Bend Falcon 3100-220 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 3100-220: 220 Ton, 3,100 mm, 200 mm table width, 18.5 kW motor, 180 mm/s approach, 11,286 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 11,286 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 3,100 mm (122 in) |
| Bending Power | 220 Ton (243 US tons) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Y Rapid Speed | 180 mm/s (7.09 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 160 mm/s (6.3 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 300 L (79.3 US gal) |
| Motor Power | 18.5 kW (24.8 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 200 mm (7.9 in) |
| Length | 5,050 mm (198.8 in) |
| Height | 2,700 mm (106.3 in) |
| Width | 2,250 mm (88.6 in) |
| Machine Weight | 11,286 kg (24,881 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 3100-220 is estimated between $49,500 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
Table width is 200 mm on this model. Higher tonnage is used with wider V openings, and a wide table supports those dies properly. The stroke and throat remain 275 mm and 410 mm.
11,286 kg, at 5,050 mm long, 2,250 mm wide and 2,700 mm high. The oil capacity of 300 L should be counted in when planning the first fill.
Stronger, yes. The Power-Bend Falcon 3100-260 has a 22 kW motor and a 220 mm table, though its rapid approach drops to 140 mm/s. This machine approaches at 180 mm/s.
Motorized crowning is listed for this size. Ermak also offers hydraulic crowning with multiple cylinders acting on a special lower beam as an option.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.