The Ermak Power-Bend Falcon 3100-260 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 3100-260 press brake: 260 Ton, 3,100 mm, 22 kW motor, 220 mm table, 140 mm/s approach, 13,886 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 13,886 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 3,100 mm (122 in) |
| Bending Power | 260 Ton (287 US tons) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Y Rapid Speed | 140 mm/s (5.51 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 135 mm/s (5.31 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 300 L (79.3 US gal) |
| Motor Power | 22 kW (29.5 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 220 mm (8.7 in) |
| Length | 4,550 mm (179.1 in) |
| Height | 2,900 mm (114.2 in) |
| Width | 2,350 mm (92.5 in) |
| Machine Weight | 13,886 kg (30,613 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 3100-260 is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
It applies 260 Ton across 3,100 mm, with a 220 mm wide table for plate dies and a 22 kW motor. That opens up thicker material at full length.
140 mm/s in approach, 10 mm/s when bending and 135 mm/s on the return stroke. Backgauge speeds are unchanged from the rest of the range: 500 mm/s in X and 350 mm/s in R.
It stands 2,900 mm high. The Power-Bend Falcon 3100-220 is 2,700 mm high, so check doors and crane hooks if this model replaces a lighter one. Weight is 13,886 kg.
At the next tonnage. The Power-Bend Falcon 3100-320 has a 375 mm stroke and 650 mm of daylight with a 30 kW motor. This model has 275 mm and 550 mm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.