The Ermak Power-Bend Falcon 3100-320 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 3100-320: 320 Ton, 3,100 mm, 375 mm stroke, 650 mm daylight, 30 kW motor, 240 mm table, 16,840 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 16,840 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 3,100 mm (122 in) |
| Bending Power | 320 Ton (353 US tons) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Y Rapid Speed | 140 mm/s (5.51 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 150 mm/s (5.91 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 400 L (105.7 US gal) |
| Motor Power | 30 kW (40.2 hp) |
| Stroke | 375 mm (14.8 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 240 mm (9.4 in) |
| Length | 4,550 mm (179.1 in) |
| Height | 3,200 mm (126 in) |
| Width | 2,450 mm (96.5 in) |
| Machine Weight | 16,840 kg (37,125 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 3100-320 is estimated between $52,500 and $92,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $814 / month.
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 3100-320 is estimated between $52,500 and $92,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $814 / month.
The main motor is 30 kW. Oil capacity is 400 L. Ermak offers a start-stop system with soft starter as an option for the main motor.
4,550 mm long, 2,450 mm wide, 3,200 mm high and 16,840 kg. Compare that with the Power-Bend Falcon 3100-260 at 13,886 kg and 2,900 mm high.
Not in the table. X travel is 800 mm and R travel 250 mm, with speeds of 500 mm/s and 350 mm/s. An X5 finger group with 5 servo motors is optional.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.