The Ermak Power-Bend Falcon 3760-135 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 3760-135: 3,760 mm bending length, 135 Ton, 3,250 mm between columns, 200 mm/s approach, 11 kW, 9,400 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 9,400 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 3,760 mm (148 in) |
| Bending Power | 135 Ton (149 US tons) |
| Distance Between Columns | 3,250 mm (128 in) |
| Y Rapid Speed | 200 mm/s (7.87 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 120 mm/s (4.72 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 200 L (52.8 US gal) |
| Motor Power | 11 kW (14.8 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 5,560 mm (218.9 in) |
| Height | 2,650 mm (104.3 in) |
| Width | 2,150 mm (84.6 in) |
| Machine Weight | 9,400 kg (20,723 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 3760-135 is estimated between $47,500 and $84,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $736 / month.
Shops whose parts outgrow a three-metre brake but stay thin. It bends 3,760 mm with 135 Ton and passes parts up to 3,250 mm wide between its columns.
By motorized crowning under CNC control, listed as standard for this size. Ermak states that it compensates deflection automatically to keep bend angles even along the part.
Rapid approach is 200 mm/s, working speed 10 mm/s and return speed 120 mm/s. The X axis of the backgauge moves at 500 mm/s over a travel of 800 mm.
Yes. The Power-Bend Falcon 3760-175 uses a 15 kW motor and weighs 10,300 kg, within the same 5,560 mm overall length. This model weighs 9,400 kg.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.