The Ermak Power-Bend Falcon 3760-320 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 3760-320: 320 Ton, 3,760 mm, 375 mm stroke, 650 mm daylight, 30 kW motor, 220 mm table, 20,150 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 20,150 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 3,760 mm (148 in) |
| Bending Power | 320 Ton (353 US tons) |
| Distance Between Columns | 3,250 mm (128 in) |
| Y Rapid Speed | 140 mm/s (5.51 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 150 mm/s (5.91 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 400 L (105.7 US gal) |
| Motor Power | 30 kW (40.2 hp) |
| Stroke | 375 mm (14.8 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 220 mm (8.7 in) |
| Length | 5,800 mm (228.3 in) |
| Height | 3,365 mm (132.5 in) |
| Width | 2,520 mm (99.2 in) |
| Machine Weight | 20,150 kg (44,422 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 3760-320 is estimated between $50,500 and $89,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
In the Falcon table, yes. The 3,760 mm sizes end at 320 Ton. This model has a 30 kW motor, 400 L of oil and weighs 20,150 kg.
Daylight is 650 mm and the stroke 375 mm, with a 410 mm throat. The Power-Bend Falcon 3760-260 below it offers 550 mm of daylight and a 275 mm stroke.
140 mm/s on the approach, 10 mm/s while bending and 150 mm/s on the return. The backgauge runs at 500 mm/s in X and 350 mm/s in R.
The frame is 5,800 mm long, 2,520 mm wide and 3,365 mm high and weighs 20,150 kg. Doors, crane capacity and the floor slab all need checking against those figures.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.