The Ermak Power-Bend Falcon 4100-135 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 4100-135: 4,100 mm bending length, 135 Ton, 3,600 mm between columns, 200 mm/s approach, 11 kW, 10,200 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 10,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 4,100 mm (161.4 in) |
| Bending Power | 135 Ton (149 US tons) |
| Distance Between Columns | 3,600 mm (141.7 in) |
| Y Rapid Speed | 200 mm/s (7.87 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 120 mm/s (4.72 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 200 L (52.8 US gal) |
| Motor Power | 11 kW (14.8 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 6,000 mm (236.2 in) |
| Height | 2,660 mm (104.7 in) |
| Width | 2,160 mm (85 in) |
| Machine Weight | 10,200 kg (22,487 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 4100-135 is estimated between $50,500 and $89,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
Long, thin parts. It bends up to 4,100 mm with 135 Ton, and wide panels up to 3,600 mm can pass between its columns. The table is 90 mm wide for narrow dies.
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 4100-135 is estimated between $50,500 and $89,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
Ermak's table continues with the Power-Bend Falcon 4100-220, at 13,600 kg with an 18.5 kW motor and a 160 mm table.
Often. The standard machine has 2 sheet supports. Ermak offers pneumatic rear supports as an option, described as additional support latches for easier and more accurate bending.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.