The Ermak Power-Bend Falcon 4270-260 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 4270-260: 260 Ton, 4,270 mm bending length, 22 kW motor, 200 mm table width, 3,780 mm between columns, 18,000 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 18,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 4,270 mm (168.1 in) |
| Bending Power | 260 Ton (287 US tons) |
| Distance Between Columns | 3,780 mm (148.8 in) |
| Y Rapid Speed | 140 mm/s (5.51 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 135 mm/s (5.31 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 300 L (79.3 US gal) |
| Motor Power | 22 kW (29.5 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 200 mm (7.9 in) |
| Length | 6,320 mm (248.8 in) |
| Height | 3,070 mm (120.9 in) |
| Width | 2,400 mm (94.5 in) |
| Machine Weight | 18,000 kg (39,683 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 4270-260 is estimated between $47,000 and $83,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $729 / month.
18,000 kg. The machine is 6,320 mm long, 2,400 mm wide and 3,070 mm high, so both the floor and the access route need to be planned for a heavy, tall load.
The stroke is 275 mm inside 550 mm of daylight. Deep U sections are better served by the Power-Bend Falcon 4270-320, which has a 375 mm stroke and 650 mm of daylight.
A 22 kW motor and a hydraulic system holding 300 L of oil. Speeds are 140 mm/s in approach, 10 mm/s in the working stroke and 135 mm/s in return.
200 mm, at a height of 900 mm. A table of that width gives proper support to the wide V dies used for plate bending at this tonnage.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.