The Ermak Power-Bend Falcon 4270-320 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 4270-320: 320 Ton, 4,270 mm (14 ft), 375 mm stroke, 650 mm daylight, 30 kW motor, 22,600 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 22,600 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 4,270 mm (168.1 in) |
| Bending Power | 320 Ton (353 US tons) |
| Distance Between Columns | 3,780 mm (148.8 in) |
| Y Rapid Speed | 140 mm/s (5.51 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 150 mm/s (5.91 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 400 L (105.7 US gal) |
| Motor Power | 30 kW (40.2 hp) |
| Stroke | 375 mm (14.8 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 220 mm (8.7 in) |
| Length | 6,400 mm (252 in) |
| Height | 3,420 mm (134.6 in) |
| Width | 2,550 mm (100.4 in) |
| Machine Weight | 22,600 kg (49,824 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 4270-320 is estimated between $46,500 and $83,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $721 / month.
It pairs a 4,270 mm bending length with the large Falcon ram unit: 375 mm stroke, 650 mm daylight, 320 Ton. The table is 220 mm wide.
A machine of 22,600 kg, 6,400 mm long, 2,550 mm wide and 3,420 mm high, with a 30 kW motor. The hydraulic system needs 400 L of oil for the first fill.
One. The Power-Bend Falcon 4270-400 has a 510 mm throat and a 1,000 mm table height and weighs 26,631 kg, with a working speed of 8.4 mm/s against 10 mm/s here.
3,780 mm (148.8 in). Plates narrower than that can be fed through the frame; wider ones are bent in front of the columns within the 410 mm throat.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.