The Ermak Power-Bend Falcon 6100-320 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 6100-320: 320 Ton over 6,100 mm, 375 mm stroke, 650 mm daylight, 30 kW motor, 4 sheet supports, 30,400 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 30,400 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 6,100 mm (240.2 in) |
| Bending Power | 320 Ton (353 US tons) |
| Distance Between Columns | 5,100 mm (200.8 in) |
| Y Rapid Speed | 80 mm/s (3.15 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 75 mm/s (2.95 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 4 |
| Sheet Supports | 4 |
| Oil Capacity | 400 L (105.7 US gal) |
| Motor Power | 30 kW (40.2 hp) |
| Stroke | 375 mm (14.8 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 1,100 mm (43.3 in) |
| Table Width | 180 mm (7.1 in) |
| Length | 8,150 mm (320.9 in) |
| Height | 3,565 mm (140.4 in) |
| Width | 2,600 mm (102.4 in) |
| Machine Weight | 30,400 kg (67,019 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 6100-320 is estimated between $44,500 and $80,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
Ermak lists 80 mm/s for the approach and 75 mm/s for the return, with a 30 kW motor moving a six-metre ram through a 375 mm stroke. The working speed is 10 mm/s.
The table gives 30,400 kg, 8,150 mm of length and 3,565 mm of height. Transport, door size and crane capacity have to be agreed with Ermak before ordering; the page does not describe the delivery method.
The Power-Bend Falcon 6100-220 has a 275 mm stroke, 550 mm of daylight, an 18.5 kW motor and weighs 24,828 kg. This model has 375 mm, 650 mm, 30 kW and 30,400 kg.
Four sheet supports at the front are standard on this size. Pneumatic rear supports and a sheet extraction system for removing bent parts are listed as options.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.