The Feeler FDM-4235 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 4200 x 3400 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-4235 mould machining center: 4,200 × 3,400 mm X/Y travel, 4,000 × 3,000 mm table, 24 (27) ton load, 6,000 rpm spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,200 mm |
| Y-Axis Travel | 3,400 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 24 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,200 mm (165.4 in) |
| Y Axis Travel | 3,400 (4,000) mm (133.9 (157.5) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 4,000 mm (157.5 in) |
| Table Width | 3,000 mm (118.1 in) |
| Max Table Load | 24 (27) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-4235 is estimated between $85,000 and $150,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,318 / month.
3,000 mm (118.1 in), with a length of 4,000 mm (157.5 in). Y travel is 3,400 mm (133.9 in) as listed, and 4,000 mm appears in brackets as the longer alternative.
A wider table as well as more Y. The FDM-4232 has a 2,600 mm wide table, 3,100 (3,700) mm of Y and 21 (24) ton. The FDM-4235 has a 3,000 mm wide table, 3,400 (4,000) mm of Y and 24 (27) ton.
On guideways in what Feeler calls an optimized four-rail symmetrical layout, for wide load-bearing surfaces. The maker also describes full-travel supported axes. Guideway type and dimensions are not given.
X and Y rapid at 15 m/min (591 ipm) and Z at 12 m/min (472 ipm). Spindle speed is 6,000 rpm, with 4,000-8,000 rpm in brackets, on a BT/DIN/CAT 50 taper or the bracketed #40.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.