The Feeler FDM-8232 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 8200 x 3100 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-8232 mould machining center: 8,200 × 3,100 mm X/Y travel, 8,000 × 2,600 mm table, 30 ton load, rack and pinion X drive.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 8,200 mm |
| Y-Axis Travel | 3,100 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 30 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 8,200 mm (322.8 in) |
| Y Axis Travel | 3,100 (3,700) mm (122.0 (145.7) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 8,000 mm (315.0 in) |
| Table Width | 2,600 mm (102.4 in) |
| Max Table Load | 30 ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-8232 is estimated between $81,000 and $144,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,256 / month.
30 ton. Unlike the shorter models, the load cell shows no bracketed higher figure. The FDM-7232, one length shorter, is listed at 27 ton with 30 ton in brackets.
Feeler states that for X-axis travel over 7200 mm, a rack and pinion drive with reduction gearbox ensures minimal backlash and maintains precise positioning. With 8,200 mm (322.8 in) of X travel the FDM-8232 falls in that range.
By width. The FDM-8228 lists 2,700 (3,300) mm of Y and 27 (30) ton. The FDM-8232 lists 3,100 (3,700) mm and 30 ton. The FDM-8235 lists 3,400 (4,000) mm, a table 3,000 mm wide and 30 ton.
The rating is 30 ton for the whole 8,000 × 2,600 mm table. How much of that may be concentrated in a short length is not stated on the series page, so a compact, dense workpiece needs the maker's load-distribution limits.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.