The Feeler FDM-8235 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-8235, the largest FDM mould machining center: 8,200 × 3,400 mm X/Y travel, 8,000 × 3,000 mm table, 30 ton load, 6,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 8,200 mm |
| Y-Axis Travel | 3,400 mm |
| Z-Axis Travel | 0 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 30 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 8,200 mm (322.8 in) |
| Y Axis Travel | 3,400 (4,000) mm (133.9 (157.5) in) |
| Table Length | 8,000 mm (315.0 in) |
| Table Width | 3,000 mm (118.1 in) |
| Max Table Load | 30 ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-8235 is estimated between $80,000 and $143,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,240 / month.
It is not stated. The Z-axis cell in this model's column is empty on Feeler's series page. The FDM-8232 in the neighbouring column lists 800 mm with 1,000-1,400 mm in brackets, but that figure should not be assumed for the FDM-8235 without confirmation.
X travel is 8,200 mm (322.8 in) and Y travel 3,400 mm (133.9 in), with 4,000 mm (157.5 in) as the bracketed alternative. The table is 8,000 × 3,000 mm (315.0 × 118.1 in).
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-8235 is estimated between $80,000 and $143,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,240 / month.
A rack and pinion drive with reduction gearbox, according to Feeler's statement for X-axis travel over 7200 mm. The stated purpose is minimal backlash and precise positioning over the long stroke.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.