The Feeler FT-250(MC) is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FT-250(MC) box way lathe: 10 in chuck, 420 mm turning diameter, 1,037 mm turning length, 77 mm bar, 3,500 rpm, BMT65-12 turret.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 210 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 10 in (254 mm) |
| Max Turning Diameter | 420 mm (16.5 in) |
| Max Turning Length | 1,037 mm (40.8 in) |
| Bar Capacity | 77 mm (3.0 in) |
| X Axis Travel | 210+20 mm (8.3+0.8 in) |
| Z E Axis Travel | 1,120 mm (44.1 in) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Nose | A2-8 |
| Spindle Bore | 88 mm (3.5 in) |
| Tailstock Taper | MT-4 |
| Turret Stations | BMT65-12 |
According to secondary market equipment benchmarks for November 2026, the Feeler FT-250(MC) is estimated between $40,500 and $81,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $628 / month.
Maximum turning length is 1,037 mm (40.8 in), with 1,120 mm (44.1 in) of Z travel. Maximum turning diameter is 420 mm (16.5 in) and the tailstock spindle has an MT-4 taper.
Feeler describes the FT-250 as equipped with a BMT65 driven turret and C-axis, allowing turning, milling, drilling and tapping in a single setup. The column is headed FT-250(MC), so the plain FT-250 and the driven-tool MC version share one set of figures.
The FT-250SY lists a Y axis travel of 100 (±50) mm and no tailstock, and its Z/E travel is given as 1,050/947 mm, which indicates a second spindle on an E axis. The FT-250(MC) has a tailstock and no Y axis.
An A2-8 spindle nose with an 88 mm (3.5 in) through-hole, 3,500 rpm maximum, carrying a 10 in (254 mm) chuck. Power is not given on the series page.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.