The Feeler FT-250SY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FT-250SY twin-spindle Y-axis box way lathe: 10 in chuck, 420 mm turning diameter, 100 mm Y travel, BMT65-12 driven turret.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 210 mm |
| Y-Axis Travel | 100 mm |
| Z-Axis Travel | 0 mm |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 10 in (254 mm) |
| Max Turning Diameter | 420 mm (16.5 in) |
| Max Turning Length | 1,005 mm (39.6 in) |
| Bar Capacity | 77 mm (3.0 in) |
| X Axis Travel | 210+10 mm (8.3+0.4 in) |
| Y Axis Travel | 100 (±50) mm (3.9 (±2.0) in) |
| Z E Axis Travel | 1,050/947 mm (41.3/37.3 in) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Nose | A2-8 |
| Spindle Bore | 88 mm (3.5 in) |
| Turret Stations | BMT65-12 |
According to secondary market equipment benchmarks for November 2026, the Feeler FT-250SY is estimated between $37,500 and $76,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $581 / month.
100 (±50) mm, that is 50 mm either side of centre. Feeler says the orthogonal Y-axis uses a full box way, non-virtual design, providing high rigidity, stable accuracy and efficient chip management.
The series text speaks of a twin spindle design, and the table gives Z/E axis travel as 1,050/947 mm with no tailstock. Feeler does not list the second spindle's figures in a clearly labelled row.
A 10 in (254 mm) chuck on an A2-8 nose, 3,500 rpm, an 88 mm through-hole and 77 mm of bar work capacity. Maximum turning diameter is 420 mm (16.5 in) and length 1,005 mm (39.6 in).
BMT65-12: a 12-station turret with the BMT65 interface. Feeler describes it as a driven turret and says the servo-driven turret with large-diameter curved-tooth coupling enables fast and rigid tool changes.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.