The Feeler FTC-300 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FTC-300 compact CNC lathe: 6 in chuck, ø300 mm turning diameter, 320 mm turning length, ø52 mm bar capacity, 6,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 150 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 350 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 6 in (152 mm) |
| Max Turning Diameter | ø300 mm (ø11.8 in) |
| Max Turning Length | 320 mm (12.6 in) |
| Bar Capacity | ø52 mm (ø2.0 in) |
| X Axis Travel | 150+20 mm (5.9+0.8 in) |
| Z Axis Travel | 350 mm (13.8 in) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Nose | A2-5 |
| Spindle Bore | ø62 mm (ø2.4 in) |
| Tailstock Taper | MT-3 |
| Turret Stations | 10 |
According to secondary market equipment benchmarks for November 2026, the Feeler FTC-300 is estimated between $36,000 and $74,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $558 / month.
Feeler says it occupies just 2.5 m × 1.5 m. Its working figures are a 6 in (152 mm) chuck, ø300 mm (ø11.8 in) maximum turning diameter, 320 mm (12.6 in) of turning length and 350 mm (13.8 in) of Z travel.
ø52 mm (ø2.0 in), through a spindle hole of ø62 mm (ø2.4 in). That is the same bar size as the first figure on the 8 in FTC-350/L/XL, in a smaller and faster machine.
10 stations. The larger two-axis lathes in the series are printed as 8(12), so the FTC-300 sits between their standard and alternative turrets. No tooling interface is given.
No. The FTC-300 has one column, with empty Y-axis and E-axis cells and no bracketed alternatives. In this series, driven tools start with the FTC-350MC/LMC/XLMC.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.