The Feeler FTC-350LY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. It offers working travels of 175 x 80 x 625 mm, a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FTC-350LY Y-axis lathe: 8 in chuck, ø350 mm turning diameter, 585 mm turning length, 80 (±40) mm Y travel, 4,500 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 175 mm |
| Y-Axis Travel | 80 mm |
| Z-Axis Travel | 625 mm |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 8 in (203 mm) |
| Max Turning Diameter | ø350 mm (ø13.8 in) |
| Max Turning Length | 585 mm (23.0 in) |
| Bar Capacity | ø52 mm (ø2.0 in) |
| X Axis Travel | 175+25 mm (6.9+1.0 in) |
| Y Axis Travel | 80 (±40) mm (3.1 (±1.6) in) |
| Z Axis Travel | 625 mm (24.6 in) |
| Max Spindle Speed | 4,500 rpm |
| Spindle Nose | A2-6 |
| Spindle Bore | ø62 (ø76) mm (ø2.4 (ø3.0) in) |
| Tailstock Taper | MT-4 |
According to secondary market equipment benchmarks for November 2026, the Feeler FTC-350LY is estimated between $37,000 and $75,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $574 / month.
According to secondary market equipment benchmarks for November 2026, the Feeler FTC-350LY is estimated between $37,000 and $75,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $574 / month.
The FTC-350LY adds the Y axis and comes in one length, 585 mm of turning length. The FTC-350MC/LMC/XLMC has no Y travel, comes in three lengths up to 970 mm and is listed with a ø235 mm turning diameter against ø350 mm here.
Yes, as a separate column. The FTC-350SLY lists the same 80 (±40) mm Y travel with a second 6 in chuck and 660 mm of E-axis travel in place of the tailstock. The FTC-350LY itself has a tailstock with an MT-4 taper.
ø52 mm (ø2.0 in). The through-spindle hole is printed as ø62 (ø76) mm, but unlike the two-axis FTC-350/L/XL this column shows no second bar figure, so ask whether the larger bore raises bar capacity on this model.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.