The Feeler FTC-350S/LS/XLS is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FTC-350S/LS/XLS sub-spindle lathe: 8/6 in chucks, ø330 mm turning diameter, 4,500/6,000 rpm, 12 stations, three bed lengths.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 180 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 330 mm |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 8/6 in (203/152 mm) |
| Max Turning Diameter | ø330 mm (ø13.0 in) |
| Max Turning Length | 290/600/910 mm (11.4/23.6/35.8 in) |
| Bar Capacity | ø52/ø45 mm (ø2.0/ø1.8 in) |
| X Axis Travel | 180+10 mm (7.1+0.4 in) |
| Z Axis Travel | 330/640/950 mm (13.0/25.2/37.4 in) |
| E Axis Travel | 345/660/975 mm (13.6/26.0/38.4 in) |
| Max Spindle Speed | 4,500/6,000 rpm |
| Spindle Nose | A2-6/A2-5 |
| Spindle Bore | ø62/ø56 mm (ø2.4/ø2.2 in) |
| Turret Stations | 12 |
According to secondary market equipment benchmarks for November 2026, the Feeler FTC-350S/LS/XLS is estimated between $40,000 and $80,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $620 / month.
The table does not spell it out, but the S columns are the ones with two chucks (8/6 in), two spindle noses (A2-6/A2-5), an E-axis travel row and no tailstock taper. Feeler's text names a sub-spindle among the FTC-350 options, and these columns match it.
Spindle speed is printed as 4,500/6,000 rpm. Read with the other paired rows, the 4,500 rpm figure belongs to the A2-6 main spindle and 6,000 rpm to the smaller A2-5 spindle with the 6 in chuck.
It is the travel of the second spindle along the bed. The table lists 345/660/975 mm (13.6/26.0/38.4 in) for the S, LS and XLS, which is slightly more than the Z travel of 330/640/950 mm on each length.
Not as listed. The tool-station row gives 12 with no driven-tool interface. For milling with a sub-spindle Feeler lists the FTC-350SLMC/SXLMC, whose turret is given as 12-BMT 55, and the FTC-350SLY, which adds a Y axis.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.