The Feeler FTC-640L(MC) is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FTC-640L(MC) long-bed CNC lathe: 15 in chuck, ø640 mm turning diameter, 1,500 mm Z travel, A2-11 geared spindle, 2,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 320 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 1,500 mm |
| Maximum Spindle Speed | 2,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 15 in (381 mm) |
| Max Turning Diameter | ø640 (520) mm (ø25.2 (20.5) in) |
| Max Turning Length | 808 (760) mm (31.8 (29.9) in) |
| Bar Capacity | ø117.5 mm (ø4.6 in) |
| X Axis Travel | 320+25 (260+15) mm (12.6+1.0 (10.2+0.6) in) |
| Z Axis Travel | 1,500 (1,240) mm (59.1 (48.8) in) |
| Max Spindle Speed | 2,000 rpm (ZF GEAR TRANSMISSION) |
| Spindle Nose | A2-11 |
| Spindle Bore | ø131 mm (ø5.2 in) |
| Tailstock Taper | MT-5 |
| Turret Stations | 12(12-VDI60) |
According to secondary market equipment benchmarks for November 2026, the Feeler FTC-640L(MC) is estimated between $38,000 and $77,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $589 / month.
The table is not consistent on this. Z travel is 1,500 mm (59.1 in), or 1,240 mm for the MC, but the maximum turning length cell prints 808 (760) mm, the same as the short-bed model. Confirm the distance between centres with Feeler.
Yes, by the table. Both columns list a 15 in chuck, an A2-11 nose, a ø131 mm through hole, ø117.5 mm bar capacity and 2,000 rpm with ZF gear transmission.
Turning diameter drops from ø640 mm to ø520 mm (ø20.5 in), X travel from 320+25 mm to 260+15 mm and Z travel from 1,500 mm to 1,240 mm (48.8 in). The turret for the MC is given as 12-VDI60.
The tailstock spindle has an MT-5 taper hole, one size above the MT-4 used on the FTC-550 and smaller models. Quill stroke, thrust and whether it is programmable are not stated in the series table.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.