The Feeler HT-30Y is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler HT-30Y turn-mill lathe with Y axis: 10 in chuck, φ356 mm turning diameter, 705 mm turning length, φ78 mm bar, 12-station turret.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 260 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 10 in (254 mm) |
| Max Turning Diameter | φ356 mm (φ14.0 in) |
| Max Turning Length | 705 mm (27.8 in) |
| Bar Capacity | φ78 mm (φ3.1 in) |
| X Axis Travel | 260 mm (10.2 in) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Nose | JIS A2-8 |
| Spindle Bore | φ88 mm (φ3.5 in) |
| Tailstock Taper | MT-5 |
| Turret Stations | 12 |
According to secondary market equipment benchmarks for November 2026, the Feeler HT-30Y is estimated between $36,000 and $74,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $558 / month.
Off-centre milling and drilling with the turret's driven tools. Feeler describes a compound Y-axis system with a 30-degree stacked saddle design that minimizes path errors during milling or eccentric machining.
This page does not state it. In Feeler's HT table the travel rows are mislabelled, with a turning-length figure under the Y heading, so the values were left out. Ask the maker for the confirmed Y stroke.
A 10 in (254 mm) chuck, φ356 mm (φ14.0 in) turning diameter, 705 mm (27.8 in) turning length, φ78 mm bar capacity and 260 mm of X travel. Spindle speed is 3,500 rpm on a JIS A2-8 nose.
No. It has a tailstock with an MT-5 taper. The model with a second spindle is the HT-30SY, whose column lists paired spindle values and no tailstock.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.