The Feeler QMP-23 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 580 x 420 x 510 mm, a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler QMP-23: 30-taper VMC with 580 x 420 x 510 mm travels, 12,000 rpm direct drive spindle, 48 m/min rapids on all axes, 20 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 580 mm |
| Y-Axis Travel | 420 mm |
| Z-Axis Travel | 510 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | 7/24 Taper No.30 |
| Table / Platter / Chuck Size | 650 x 420 mm (25.6 x 16.5 in) |
| Max Table Load Capacity | 300 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 580 mm (22.8 in) |
| Y Axis Travel | 420 mm (16.5 in) |
| Z Axis Travel | 510 mm (20.1 in) |
| Table Size | 650 x 420 mm (25.6 x 16.5 in) |
| Max Table Load | 300 kg (661 lb) |
| Max Spindle Speed | 12,000 rpm |
| Spindle Taper | 7/24 Taper No.30 |
| Rapid Traverse X | 48 m/min (1,890 ipm) |
| Rapid Traverse Y | 48 m/min (1,890 ipm) |
| Rapid Traverse Z | 48 m/min (1,890 ipm) |
| Tool Capacity | 20 |
According to secondary market equipment benchmarks for November 2026, the Feeler QMP-23 is estimated between $44,500 and $80,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
A 7/24 taper No.30 at 12,000 rpm. Feeler describes the spindles of the QMP-23 and QMP-30 as direct drive, and says the machines can also be equipped with a 20,000 rpm spindle to support small-diameter tools and high-speed cutting.
580 x 420 x 510 mm (22.8 x 16.5 x 20.1 in), with a 650 x 420 mm (25.6 x 16.5 in) table rated for 300 kg (661 lb). Y travel equals the table depth.
The two share travels, table size and load. The VMX-580 uses a No.40 taper with a Z rapid of 32 m/min. The QMP-23 uses a No.30 taper and moves Z at 48 m/min, which favours drilling and tapping cycles over heavier milling.
Feeler says the QMP series can be equipped with an ultrasonic cutting system that uses high-frequency vibration to reduce cutting resistance and improve surface finish, and calls it ideal for precision machining of brittle or high-hardness materials.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.