The Feeler QMP-32APC is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 800 x 520 x 505 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler QMP-32APC: No.40 pallet-changer VMC, 700 x 500 mm pallets rated 200 kg, 800 x 520 x 505 mm travels, 10,000 rpm, 24 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 520 mm |
| Z-Axis Travel | 505 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Taper Interface | 7/24 Taper No.40 |
| Table / Platter / Chuck Size | 700 x 500 mm (27.6 x 19.7 in) |
| Max Table Load Capacity | 200 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 800 mm (31.5 in) |
| Y Axis Travel | 520 mm (20.5 in) |
| Z Axis Travel | 505 mm (19.9 in) |
| Table Size | 700 x 500 mm (27.6 x 19.7 in) |
| Max Table Load | 200 kg (441 lb) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Taper | 7/24 Taper No.40 |
| Rapid Traverse X | 48 m/min (1,890 ipm) |
| Rapid Traverse Y | 48 m/min (1,890 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| Tool Capacity | 24 |
According to secondary market equipment benchmarks for November 2026, the Feeler QMP-32APC is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
Each pallet is 700 x 500 mm (27.6 x 19.7 in) with a maximum loading weight of 200 kg (441 lb). The travels of 800 x 520 mm in X and Y extend beyond the pallet on both axes.
That is what Feeler's table prints for the QMP-32APC, against 820 mm for the QMP-32. The page gives no explanation. It may be a real reduction from the pallet mechanism or a typing difference, so ask the maker for the confirmed stroke.
A 7/24 Taper No.40 spindle at 10,000 rpm. Feeler describes the spindles of the QMP-32 and QMP-40 as belt type, and says a 20,000 rpm spindle can be fitted to QMP machines for small-diameter tools.
The VMP-32APC has the same pallet size and 200 kg rating, with 820 mm of X, X and Y rapids of 40 m/min and 22 tools. The QMP-32APC is listed with 48 m/min rapids and 24 tools, and its series page quotes a pallet change time, which the VMP page does not.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.