The Feeler SVW-2113 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-2113 gantry machining center: 2,100 mm X travel, 2,000 × 1,100 mm table, 4 ton load, 6,000 rpm 50-taper spindle, 24 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,100 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 4 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,100 mm (82.7 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 2,000 mm (78.7 in) |
| Table Width | 1,100 mm (43.3 in) |
| Max Table Load | 4 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Tool Capacity | 24 (32/40) |
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-2113 is estimated between $79,000 and $141,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,225 / month.
2,000 mm long and 1,100 mm wide (78.7 × 43.3 in), with a maximum load of 4 ton. X travel is 2,100 mm (82.7 in), slightly longer than the table.
24 m/min (945 ipm) on X, 24 m/min on Y and 20 m/min (787 ipm) on Z. From the SVW-2217 upward every axis is listed at 15 m/min (591 ipm) or less.
The spindle-speed row reads 6,000 (8,000-15,000) rpm and the taper row BT/DIN/CAT 50 (#40). The 50 taper at 6,000 rpm is the standard geared spindle; the bracketed values are alternatives. Power and torque are not given.
The Y-axis figure is not listed on this page. Ask the maker for the Y stroke and the distance between the columns before planning parts close to the 1,100 mm table width.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.