The Feeler SVW-2822 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-2822 gantry machining center: 2,800 mm X travel, 2,600 × 1,800 mm table, 11 ton load, 15 m/min rapids, geared 6,000 rpm spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 11 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,800 mm (110.2 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 2,600 mm (102.4 in) |
| Table Width | 1,800 mm (70.9 in) |
| Max Table Load | 11 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-2822 is estimated between $80,500 and $144,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,248 / month.
1,800 mm (70.9 in), with a length of 2,600 mm (102.4 in). The Y travel and the distance between the columns are not listed on this page, so check the widest part against the maker's layout drawing.
Table width and load. The SVW-2817 has a 1,400 mm wide table rated at 9 ton. The SVW-2822 has an 1,800 mm wide table rated at 11 ton. X travel, table length, rapids, spindle and magazine rows are the same.
15 m/min (591 ipm), the same as Y and Z. The SVW-3222, the next length in this width, is listed at 12 m/min (472 ipm) on X.
A geared spindle at 6,000 rpm with a BT/DIN/CAT 50 taper. Feeler describes a fully geared internal transmission with a two-speed gearbox. The alternative shown in brackets is 8,000-15,000 rpm with #40.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.