The Feeler SVW-3217 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-3217 gantry machining center: 3,200 mm X travel, 3,000 × 1,400 mm table, 10 ton load, geared 6,000 rpm spindle, 24-60 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,200 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 10 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 3,000 mm (118.1 in) |
| Table Width | 1,400 mm (55.1 in) |
| Max Table Load | 10 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-3217 is estimated between $80,500 and $144,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,248 / month.
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-3217 is estimated between $80,500 and $144,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,248 / month.
X is listed at 12 m/min (472 ipm) and both Y and Z at 15 m/min (591 ipm). The shorter SVW-2817 keeps 15 m/min on X as well.
Yes. Feeler states that the spindle uses a fully geared internal transmission with a two-speed gearbox, offering high-torque output at low speed for heavy cutting and increased precision at high speed. The listed top speed is 6,000 rpm.
For more length, the SVW-4217 has a 4,000 mm table and a 14 ton rating in the same width. For more width, the SVW-3222 keeps the 3,000 mm length on a 1,800 mm wide table rated for 12 ton.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.