The Feeler SVW-3225 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-3225 gantry machining center: 3,200 mm X travel, 3,000 × 2,000 mm table, 12 ton load, 6,000 rpm geared spindle, 24-60 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,200 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 12 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 3,000 mm (118.1 in) |
| Table Width | 2,000 mm (78.7 in) |
| Max Table Load | 12 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-3225 is estimated between $79,500 and $142,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,232 / month.
Not the same model, but the rows on this page match: 3,200 mm of X travel, a 3,000 × 2,000 mm table, 12 ton, and identical rapids, spindle and magazine. The Y-axis travel is what differs, and it is not listed here.
12 ton including fixtures. The shorter SVW-2825 is rated at 11 ton and the longer SVW-4225 at 15 ton, all three on tables 2,000 mm wide.
The series heading is Heavy Cutting Machines with Exceptional Rigidity. Feeler cites a box-type structure with reinforced rib design and a full-travel supported table that eliminates overhang. No stiffness or accuracy figures are published to quantify it.
Listed: 6,000 rpm, BT/DIN/CAT 50, 24 tools. Bracketed alternatives: 8,000-15,000 rpm, #40, and magazines of 32, 40 or 60 tools. The table does not say which combinations can be ordered together.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.