The Feeler SVW-4113 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-4113 gantry machining center: 4,100 mm X travel, 4,000 × 1,100 mm table, 8 ton load, 6,000 rpm 50-taper geared spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,100 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 8 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,100 mm (161.4 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 4,000 mm (157.5 in) |
| Table Width | 1,100 mm (43.3 in) |
| Max Table Load | 8 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Tool Capacity | 24 (32/40) |
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-4113 is estimated between $80,000 and $143,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,240 / month.
In working terms, X travel is 4,100 mm (161.4 in) and the table is 4,000 mm (157.5 in) long by 1,100 mm (43.3 in) wide. Overall machine length and floor space are not given in the series table.
The table gives 20 m/min (787 ipm) for X here and 24 m/min for the SVW-3113. Feeler does not state the reason. A longer table and its load are heavier to accelerate, which is the usual explanation.
BT/DIN/CAT 50 as listed, at 6,000 rpm, with #40 in brackets as the alternative that goes with the 8,000-15,000 rpm range. Feeler describes the spindle drive as fully geared with a two-speed gearbox.
Yes, the 4,000 mm table length allows fixtures in a row, and the total must stay within the 8 ton load. Whether the machine can be divided into two work zones for loading during the cut is not stated by the maker.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.