The Feeler SVW-4223 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-4223 gantry machining center: 4,200 mm X travel, 4,000 × 2,000 mm table, 15 ton load, geared 6,000 rpm spindle, 24-60 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,200 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 15 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,200 mm (165.4 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 4,000 mm (157.5 in) |
| Table Width | 2,000 mm (78.7 in) |
| Max Table Load | 15 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-4223 is estimated between $84,000 and $149,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,302 / month.
The table is 4,000 mm by 2,000 mm (157.5 × 78.7 in) and carries up to 15 ton. X travel is 4,200 mm (165.4 in) and Z travel 800 mm, or 1,000 mm as the bracketed alternative. Y travel is not listed on this page.
Nothing in the rows shown here. Both columns give the same X travel, table, load, rapids, spindle and magazine. The model numbers differ, and the Y-axis travel of each should be confirmed with Feeler before choosing.
Feeler names an optional automatic attachment change system that reduces manual changeover time, improves productivity and minimizes machining errors. Which heads it changes is not stated on the series page.
6,000 rpm for the listed geared spindle with a BT/DIN/CAT 50 taper. The bracketed alternative is 8,000-15,000 rpm with #40, a lighter spindle for higher surface speeds.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.