The Feeler VDX-850 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 850 x 650 x 635 mm, a top spindle speed of 15,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler VDX-850: mold-making VMC with 850 x 650 x 635 mm travels, 15,000 rpm direct-drive No.40 spindle, 1,500 kg table, 24 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 850 mm |
| Y-Axis Travel | 650 mm |
| Z-Axis Travel | 635 mm |
| Maximum Spindle Speed | 15,000 RPM |
| Spindle Taper Interface | 7/24 Taper No.40 |
| Table / Platter / Chuck Size | 1,200 x 600 mm (47.2 x 23.6 in) |
| Max Table Load Capacity | 1,500 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 850 mm (33.5 in) |
| Y Axis Travel | 650 mm (25.6 in) |
| Z Axis Travel | 635 mm (25.0 in) |
| Table Size | 1,200 x 600 mm (47.2 x 23.6 in) |
| Max Table Load | 1,500 kg (3,307 lb) |
| Max Spindle Speed | 15,000 rpm |
| Spindle Taper | 7/24 Taper No.40 |
| Rapid Traverse X | 36 m/min (1,417 ipm) |
| Rapid Traverse Y | 36 m/min (1,417 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| Tool Capacity | 24 |
According to secondary market equipment benchmarks for November 2026, the Feeler VDX-850 is estimated between $53,000 and $97,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $822 / month.
850 mm (33.5 in) in X, 650 mm (25.6 in) in Y and 635 mm (25.0 in) in Z. The table is 1,200 x 600 mm (47.2 x 23.6 in) and carries up to 1,500 kg (3,307 lb).
Feeler's table lists the same 1,200 x 600 mm table for the VDX-850 and the VDX-1100, so the VDX-850 has more table than stroke. The practical use is parking a fourth-axis unit at one end. Anything that must be cut has to sit within the 850 mm of travel.
A 15,000 rpm high-speed direct-drive spindle with a 7/24 taper No.40. Feeler says it delivers full power directly to the spindle end, and offers an oil-air lubrication system as an option to extend spindle life.
Feeler describes STC+ (Smooth Tolerance Control) as intelligent compensation that improves surface finish quality and reduces machining time, and says the VDX series includes it. The page gives no further detail on the control it runs on.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.