The Feeler VMP-30 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 760 x 420 x 510 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler VMP-30: 760 x 420 x 510 mm travels, 890 x 420 mm table rated 300 kg, 10,000 rpm No.40 spindle, 36 m/min rapids, 18 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 760 mm |
| Y-Axis Travel | 420 mm |
| Z-Axis Travel | 510 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Taper Interface | 7/24 Taper No.40 |
| Table / Platter / Chuck Size | 890 x 420 mm (35.0 x 16.5 in) |
| Max Table Load Capacity | 300 kg |
| Automatic Tool Changer (ATC) | 18 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 760 mm (29.9 in) |
| Y Axis Travel | 420 mm (16.5 in) |
| Z Axis Travel | 510 mm (20.1 in) |
| Table Size | 890 x 420 mm (35.0 x 16.5 in) |
| Max Table Load | 300 kg (661 lb) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Taper | 7/24 Taper No.40 |
| Rapid Traverse X | 36 m/min (1,417 ipm) |
| Rapid Traverse Y | 36 m/min (1,417 ipm) |
| Rapid Traverse Z | 36 m/min (1,417 ipm) |
| Tool Capacity | 18 |
According to secondary market equipment benchmarks for November 2026, the Feeler VMP-30 is estimated between $51,500 and $90,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $798 / month.
760 mm (29.9 in) in X, 420 mm (16.5 in) in Y and 510 mm (20.1 in) in Z. The table is 890 x 420 mm (35.0 x 16.5 in) and carries up to 300 kg (661 lb).
If parts are deep or heavy, yes. The VMP-32 has 820 mm of X, 520 mm of Y, a 950 x 520 mm table rated 800 kg and 22 tools, with X and Y rapids of 40 m/min. The VMP-32 Z rapid is 30 m/min, slower than the 36 m/min here.
A 7/24 taper No.40 at 10,000 rpm. Feeler's series text refers to a 10,000 rpm high-speed spindle and does not state the drive type, power or torque on the page, so those need to come from a quotation or brochure.
Feeler says the Z axis of the VMP series has a higher-power motor with a balance-free design, paired with a high-speed servo direct-drive preloaded ball screw. On the VMP-30 the result in the table is 36 m/min on Z, the same as on X and Y.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.