The Feeler SHM-800L is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 1500 x 1600 x 1200 mm, a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SHM-800L horizontal boring mill: 800 mm table rated 3,000 kg, 1,500 x 1,600 x 1,200 mm travels, 4,000 rpm gear-driven spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,500 mm |
| Y-Axis Travel | 1,600 mm |
| Z-Axis Travel | 1,200 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 800 x 800 mm (31.5 x 31.5 in) |
| Max Table Load Capacity | 3,000 kg |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 800 x 800 mm (31.5 x 31.5 in) |
| Max Table Load | 3,000 kg (6,614 lb) |
| X Axis Travel | 1,500 mm (59.1 in) |
| Y Axis Travel | 1,600 mm (63.0 in) |
| Z Axis Travel | 1,200 mm (47.2 in) |
| Table Indexing | 1°/360 |
| Max Spindle Speed | 4,000 rpm |
| Rapid Traverse Xyz | 24/24/24 m/min (945/945/945 ipm) |
| Tool Capacity | 40 (60) |
The price estimate for the Feeler SHM-800L is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-shm-800l#price; the request is passed to Feeler or an authorised dealer.
X is 1,500 mm (59.1 in), Y is 1,600 mm (63.0 in) and Z is 1,200 mm (47.2 in). Rapid traverse is 24/24/24 m/min on the three axes.
3,000 kg (6,614 lb) on an 800 x 800 mm (31.5 x 31.5 in) table. The indexing angle is listed as 1°/360, so the table positions in whole degrees.
The SHM-800 has a longer X axis, 2,000 mm, and a shorter Y axis, 1,100 mm, with rapids of 10/10/10 m/min. Table size, load, Z travel, spindle speed and tool capacity are the same as on the SHM-800L.
Feeler says the Y-axis hard ways are coated with Turcite-B wear-resistant material and hand-scraped, and that the dual hard-way span of 570 mm provides support. The guideway type of X and Z is not stated on the page.
