The Feeler VMP-30 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 760 x 420 x 510 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler VMP-30: 760 x 420 x 510 mm travels, 890 x 420 mm table rated 300 kg, 10,000 rpm No.40 spindle, 36 m/min rapids, 18 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 760 mm |
| Y-Axis Travel | 420 mm |
| Z-Axis Travel | 510 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Taper Interface | 7/24 Taper No.40 |
| Table / Platter / Chuck Size | 890 x 420 mm (35.0 x 16.5 in) |
| Max Table Load Capacity | 300 kg |
| Automatic Tool Changer (ATC) | 18 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 760 mm (29.9 in) |
| Y Axis Travel | 420 mm (16.5 in) |
| Z Axis Travel | 510 mm (20.1 in) |
| Table Size | 890 x 420 mm (35.0 x 16.5 in) |
| Max Table Load | 300 kg (661 lb) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Taper | 7/24 Taper No.40 |
| Rapid Traverse X | 36 m/min (1,417 ipm) |
| Rapid Traverse Y | 36 m/min (1,417 ipm) |
| Rapid Traverse Z | 36 m/min (1,417 ipm) |
| Tool Capacity | 18 |
The price estimate for the Feeler VMP-30 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-vmp-30#price; the request is passed to Feeler or an authorised dealer.
760 mm (29.9 in) in X, 420 mm (16.5 in) in Y and 510 mm (20.1 in) in Z. The table is 890 x 420 mm (35.0 x 16.5 in) and carries up to 300 kg (661 lb).
If parts are deep or heavy, yes. The VMP-32 has 820 mm of X, 520 mm of Y, a 950 x 520 mm table rated 800 kg and 22 tools, with X and Y rapids of 40 m/min. The VMP-32 Z rapid is 30 m/min, slower than the 36 m/min here.
A 7/24 taper No.40 at 10,000 rpm. Feeler's series text refers to a 10,000 rpm high-speed spindle and does not state the drive type, power or torque on the page, so those need to come from a quotation or brochure.
Feeler says the Z axis of the VMP series has a higher-power motor with a balance-free design, paired with a high-speed servo direct-drive preloaded ball screw. On the VMP-30 the result in the table is 36 m/min on Z, the same as on X and Y.
