The Haas Automation SB-35 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas SB-35 lathe: 12 in (305 mm) chuck, 3.5 in (90 mm) bar capacity, 40 hp spindle with 425 ft-lbf at 325 rpm, 30 in (760 mm) turning length.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,500 RPM |
| Spindle Motor Rating | 40.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 14,920 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 12 in (305 mm) |
| Max Swing | 23.6 in (600 mm) |
| Max Turning Diameter | 13.5 in (345 mm) |
| Max Turning Length | 30 in (760 mm) |
| Bar Capacity | 3.5 in (90 mm) |
| Distance Between Centers | 39.2 in (995 mm) |
| X-Axis Travel | 9 in (230 mm) |
| Z-Axis Travel | 32.3 in (820 mm) |
| Rapid Traverse X | 630 ipm (16 m/min) |
| Rapid Traverse Z | 787 ipm (20 m/min) |
| Max Thrust X | 7,780 lbf (34,607 N) |
| Max Thrust Z | 7,780 lbf (34,607 N) |
| Spindle Nose | A2-8 |
| Spindle Motor Power | 40 hp (29.8 kW) |
| Max Spindle Speed | 2,500 rpm |
| Spindle Torque | 425 ft-lbf @ 325 rpm (576 N·m @ 325 rpm) |
| Spindle Torque Optional Gearbox | 1,400 ft-lbf @ 150 rpm (1,898 N·m @ 150 rpm) |
| Draw Tube Bore | 3.58 in (91 mm) |
| Spindle Bore | 4.13 in (105 mm) |
| C Axis Control Type | Interpolated Motion and Positioning |
| Tailstock Taper | MT5 |
| Tailstock Hydraulic Quill Travel | 4.7 in (120 mm) |
| Tailstock Travel | 23.6 in (600 mm) |
| Turret Stations | 12 |
| Turret Od Vs Id Tools | Any Combination (will vary with turret) |
| Turret Boring Bar Rear Clearance | 2 in (51 mm) |
| Live Tool Speed | 4,000 rpm |
| Live Tooling | BMT65 |
| Coolant Capacity | 100 gal (379 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 70 A |
| Electrical High | 440 VAC 3-phase, 35 A |
| Shipping Domestic Pallet | 191 × 90 × 84 in (485 × 229 × 213 cm) |
| Shipping Export Pallet | 191 × 90 × 84 in (485 × 229 × 213 cm) |
| Machine Weight | 14,920 lb (6,767.7 kg) |
Haas Automation publishes a list price of US$112,995 for the Haas SB-35 (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-sb-35#price; the request is passed to Haas Automation or an authorised dealer.
425 ft-lbf (576 N·m) at 325 rpm from a 40 hp (29.8 kW) drive, with a top speed of 2,500 rpm. The table also lists 1,400 ft-lbf (1,898 N·m) at 150 rpm with an optional gearbox, which is about 3.3 times the base figure and is an extra.
When the part is longer than 30 in (760 mm). The SB-35L has 52 in (1,320 mm) of Z travel and 49.6 in (1,260 mm) of turning length with the same chuck, bar capacity and spindle; the SB-35 has 32.3 in (820 mm) of Z. The SB-35L ships at 16,425 lb (7,450 kg) against 14,920 lb (6,767.7 kg) for the SB-35.
The table lists BMT65 live tooling at 4,000 rpm and a C axis with interpolated motion and positioning, which covers cross holes, flats and face patterns on the centreline. It lists no Y axis. Check with Haas which of these the quoted machine includes.
4.13 in (105 mm), with a draw tube bore of 3.58 in (91 mm) and a bar capacity of 3.5 in (90 mm). The spindle nose is A2-8 and the chuck is 12 in (305 mm). By comparison the SB-28 has a 3.39 in (86 mm) bore and 2.9 in (74 mm) of bar capacity.
Shipping weight is 14,920 lb (6,767.7 kg). Haas gives one pallet size for domestic and export shipment, 191 × 90 × 84 in (485 × 229 × 213 cm). Those are crate figures and not the installed size of the machine.
