The Haas Automation ST-10L is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas ST-10L long-bed lathe: 32.5 in (826 mm) turning length, 6.5 in (165 mm) chuck, 1.75 in bar capacity, 15 hp spindle to 6,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 10,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 6.5 in (165 mm) |
| Max Swing | 16.5 in (419 mm) |
| Max Turning Diameter | 12 in (305 mm) |
| Max Turning Diameter With Bmt45 Turret | 11 in (279 mm) |
| Max Turning Diameter With Vdi Turret | 6.8 in (173 mm) |
| Max Turning Length | 32.5 in (826 mm) |
| Bar Capacity | 1.75 in (44 mm) |
| X-Axis Travel | 7.88 in (200 mm) |
| Z-Axis Travel | 32.5 in (826 mm) |
| Rapid Traverse | 1,200 ipm (30.5 m/min) |
| Max Thrust X | 3,300 lbf (14,679 N) |
| Max Thrust Z | 3,300 lbf (14,679 N) |
| Spindle Nose | A2-5 |
| Spindle Motor Power | 15 hp (11.2 kW) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Torque | 75 ft-lbf @ 1,300 rpm (102 N·m @ 1,300 rpm) |
| Spindle Bore | 2.31 in (58.7 mm) |
| Sub Spindle Chuck Size | 5.3 in (135 mm) |
| Sub Spindle Nose | A2-5 |
| Sub Spindle Speed | 6,000 rpm |
| Sub Spindle Max Sync Speed With Main Spindle | 4,800 rpm |
| Sub Spindle Chuck Throat | Ø 1.3 in × 1.37 in DEEP (Ø 33 mm × 34.8 mm DEEP) |
| Sub Spindle Drawbar Bore | Ø 1 in × 4.5 in DEEP (Ø 25.4 mm × 114.3 mm DEEP) |
| Sub Spindle Spindle Bore | 1.5 in (38.1 mm) |
| Sub Spindle Integrated Brake Torque | 17 ft-lbf (23 N·m) |
| Sub Spindle Spindle Orientation Accuracy | ± 0.02 ° |
| Sub Spindle Rapids | 400 ipm (10 m/min) |
| Tailstock Taper | MT3 |
| Tailstock Hydraulic Quill Travel | 3.8 in (95 mm) |
| Tailstock Manual Body Positioning | 44 in (1,118 mm) |
| Tailstock Max Thrust Hyd Quill Only | 1,130 lbf (5,026 N) |
| Tailstock Min Thrust Hyd Quill Only | 140 lbf (623 N) |
| Turret Stations | 12-Station BOT |
| Turret Od Vs Id Tools | Any Combination (will vary with turret) |
| Turret Boring Bar Rear Clearance | 0.75 in (19.1 mm) |
| Coolant Capacity | 30 gal (114 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 40 A |
| Electrical High | 440 VAC 3-phase, 20 A |
| Shipping Domestic Pallet | 158 × 70 × 81 in (401 × 178 × 206 cm) |
| Shipping Export Pallet | 158 × 70 × 81 in (401 × 178 × 206 cm) |
| Machine Weight | 10,000 lb (4,536 kg) |
Haas Automation publishes a list price of US$86,995 for the Haas ST-10L (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-st-10l#price; the request is passed to Haas Automation or an authorised dealer.
Z travel and turning length are 32.5 in (826 mm) on the ST-10L and 16 in (406 mm) on the ST-10; the ST-10L ships at 10,000 lb (4,536 kg) against 7,900 lb (3,585 kg) for the ST-10. Chuck size, bar capacity, X travel, rapids and the 15 hp (11.2 kW) 6,000 rpm spindle are shared.
MT3 taper, 3.8 in (95 mm) of hydraulic quill travel and 44 in (1,118 mm) of manual body positioning. Quill thrust runs from a minimum of 140 lbf (623 N) to a maximum of 1,130 lbf (5,026 N), figures Haas gives for the hydraulic quill only.
It has the room, with a 16.5 in (419 mm) swing and a 12 in (305 mm) maximum turning diameter, but the spindle is small: 15 hp (11.2 kW) and 75 ft-lbf (102 N·m) at 1,300 rpm on a 6.5 in (165 mm) chuck. Expect light cuts at large diameters. A BMT45 turret reduces the maximum to 11 in (279 mm) and a VDI turret to 6.8 in (173 mm).
The table includes sub-spindle figures: a 5.3 in (135 mm) chuck, A2-5 nose, 6,000 rpm, and a 4,800 rpm limit when synchronised with the main spindle. It does not say whether the sub-spindle is part of the base machine, so confirm that on the quote.
Power is 220 VAC three-phase at 40 A or 440 VAC three-phase at 20 A. Air is 4 scfm at 100 psi (113 L/min at 6.9 bar), with 80 psi (5.5 bar) as the minimum. The shipping pallet is 158 × 70 × 81 in (401 × 178 × 206 cm) and the machine weighs 10,000 lb (4,536 kg).
