The Haas Automation TL-3P is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,400 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TL-3P toolroom lathe: 29 in (737 mm) swing, 63 in (1,600 mm) between centers, 30 hp A2-8 spindle, 2,400 rpm, 4.62 in bore.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,400 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Swing Over Front Apron | 29 in (737 mm) |
| Swing Over Cross Slide | 14 in (356 mm) |
| Chuck Size Max | 15 in (381 mm) |
| Max Swing | 29 in (737 mm) |
| Max Turning Diameter | 29 in (737 mm) |
| Max Turning Diameter With Bot Turret | 21 in (533 mm) |
| Max Turning Diameter With Tool Post | 29 in |
| Max Turning Length | 60 in (1,524 mm) |
| Max Turning Length With 8 Station Turret | 60 in (1,524 mm) |
| Bar Capacity | 4 in (102 mm) |
| Distance Between Centers | 63 in (1,600 mm) |
| X-Axis Travel | 16 in (406 mm) |
| Z-Axis Travel | 63 in (1,600 mm) |
| Rapid Traverse | 450 ipm (11.4 m/min) |
| Max Thrust X | 5,600 lbf (24,910 N) |
| Max Thrust Z | 5,100 lbf (22,686 N) |
| Spindle Nose | A2-8 |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Motor Power | 30 hp (22.4 kW) |
| Max Spindle Speed | 2,400 rpm |
| Spindle Torque | 300 ft-lbf @ 500 rpm (407 N·m @ 500 rpm) |
| Spindle Bore | 4.62 in (117.3 mm) |
| Tailstock Taper | MT5 |
| Tailstock Manual Quill Travel | 7 in (178 mm) |
| Turret Stations | 8 BOT |
| Turret Index Time | 1 s |
| Turret Boring Bar Rear Clearance | 1.65 in (41.8 mm) |
| Turret Boring Bar Rear Clearance From Turret Face | 5.27 in (133.9 mm) |
| Coolant Capacity | 45 gal (170 L) |
| Air Required | 4 scfm @ 100 psi (113.3 L/min @ 6.9 bar) |
| Air Pressure Max | 120 psi (8.3 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 70 A |
| Electrical High | 440 VAC 3-phase, 35 A |
Haas Automation publishes a list price of US$69,995 for the Haas TL-3P (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-tl-3p#price; the request is passed to Haas Automation or an authorised dealer.
In the headline figures the difference is spindle speed and turning length. The TL-3P runs to 2,400 rpm and lists 60 in (1,524 mm) of maximum turning length. The TL-3 runs to 2,000 rpm and lists 62 in (1,575 mm). Both have 29 in (737 mm) of swing, 16 in of X and 63 in (1,600 mm) of Z travel, an A2-8 nose, 30 hp (22.4 kW), 300 ft-lbf (407 N·m) at 500 rpm, a 4.62 in (117.3 mm) bore and an 8-station BOT turret row.
It depends on the tooling and on where the part sits. Haas lists 29 in (737 mm) of maximum turning diameter with a tool post and 21 in (533 mm) with the BOT turret. Swing over the front apron is 29 in, but swing over the cross slide is 14 in (356 mm), so work that extends over the cross slide is limited to that. The maximum chuck size is 15 in (381 mm).
Bar capacity is 4 in (102 mm) and the spindle bore is 4.62 in (117.3 mm), on an A2-8 nose. If the work is larger pipe or tube, the TL-3B lists a 7 in (178 mm) bar capacity and a 7.08 in (179.8 mm) bore with an A2-11 nose front and rear, at a lower 1,300 rpm top speed.
The table lists an MT5 tailstock taper and 7 in (178 mm) of manual quill travel. Distance between centers is 63 in (1,600 mm) and the maximum turning length is 60 in (1,524 mm), so allow for the center and the workholding when checking whether a long shaft fits.
Either 220 VAC three-phase at 70 A or 440 VAC three-phase at 35 A. Air consumption is 4 scfm at 100 psi (113.3 L/min at 6.9 bar). Supply pressure must be at least 80 psi (5.5 bar) and no more than 120 psi (8.3 bar), through a 3/8 in hose and coupler. The coolant tank holds 45 gal (170 L).
