The Haas Automation SB-35Y is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas SB-35Y: Y-axis lathe with 12 in (305 mm) chuck, 3.5 in (90 mm) bar capacity, 40 hp 2,500 rpm spindle, ± 2 in Y and 27.5 in turning length.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,500 RPM |
| Spindle Motor Rating | 40.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 13,660 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 12 in (305 mm) |
| Max Swing | 23.6 in (600 mm) |
| Max Turning Diameter | 12 in (305 mm) |
| Max Turning Length | 27.5 in (700 mm) |
| Bar Capacity | 3.5 in (90 mm) |
| Distance Between Centers | 39.1 in (993 mm) |
| X-Axis Travel | 8.1 in (206 mm) |
| Y-Axis Travel | ± 2 in (± 50 mm) |
| Z-Axis Travel | 30.1 in (765 mm) |
| Rapid Traverse X | 472 ipm (12 m/min) |
| Rapid Traverse Y | 283 ipm (7.2 m/min) |
| Rapid Traverse Z | 787 ipm (20 m/min) |
| Max Thrust X | 7,780 lbf (34,607 N) |
| Max Thrust Y | 4,490 lbf (19,972 N) |
| Max Thrust Z | 7,780 lbf (34,607 N) |
| Spindle Nose | A2-8 |
| Spindle Motor Power | 40 hp (29.8 kW) |
| Max Spindle Speed | 2,500 rpm |
| Spindle Torque | 425 ft-lbf @ 325 rpm (576 N·m @ 325 rpm) |
| Spindle Torque Optional Gearbox | 1,400 ft-lbf @ 150 rpm (1,898 N·m @ 150 rpm) |
| Draw Tube Bore | 3.58 in (91 mm) |
| Spindle Bore | 4.13 in (105 mm) |
| C Axis Speed | 60 rpm |
| C Axis Max Rating | 5 hp (3.7 kW) |
| C Axis Positioning | 0.01 ° |
| C Axis Brake Diameter | 13.9 in (353 mm) |
| C Axis Brake Holding Torque | 250 ft-lbf (339 N·m) |
| C Axis Control Type | Interpolated Motion and Positioning |
| Tailstock Taper | MT5 |
| Tailstock Hydraulic Quill Travel | 4.7 in (120 mm) |
| Tailstock Travel | 23.6 in (600 mm) |
| Turret Stations | 12 |
| Turret Od Vs Id Tools | Any Combination (will vary with turret) |
| Turret Boring Bar Rear Clearance | 2 in (51 mm) |
| Live Tool Speed | 4,000 rpm |
| Live Tooling | BMT65 |
| Coolant Capacity | 100 gal (379 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 70 A |
| Electrical High | 440 VAC 3-phase, 35 A |
| Shipping Domestic Pallet | 178 × 90 × 98 in (452 × 229 × 249 cm) |
| Shipping Export Pallet | 178 × 90 × 98 in (452 × 229 × 249 cm) |
| Machine Weight | 13,660 lb (6,196.2 kg) |
According to secondary market equipment benchmarks for November 2026, the Haas Automation SB-35Y is estimated between $45,500 and $91,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
The SB-35Y adds ± 2 in (± 50 mm) of Y travel. In return its turning envelope is a little smaller: 12 in (305 mm) maximum turning diameter, 8.1 in (206 mm) of X and 30.1 in (765 mm) of Z, where the SB-35 has 13.5 in (345 mm), 9 in (230 mm) and 32.3 in (820 mm). X rapid is 472 ipm (12 m/min) against 630 ipm (16 m/min) on the SB-35. Chuck, bar capacity and spindle rating match.
It comes down to bar size against spindle speed. The SB-28Y takes 2.9 in (74 mm) bar through a 3.39 in (86 mm) bore, carries a 10 in (254 mm) chuck and spins to 3,200 rpm, with 18.5 in (470 mm) of turning length. The SB-35Y takes 3.5 in (90 mm) bar, carries a 12 in (305 mm) chuck, stops at 2,500 rpm and turns 27.5 in (700 mm). Both are rated 40 hp (29.8 kW) and 425 ft-lbf (576 N·m) at 325 rpm.
The table lists BMT65 live tooling with a maximum speed of 4,000 rpm on a 12-station turret. OD and ID tools can go in any combination, though Haas notes this varies with the turret, and there is 2 in (51 mm) of clearance behind the turret for boring bars. The C axis runs to 60 rpm with a 5 hp (3.7 kW) maximum rating.
Yes. The table gives 1,400 ft-lbf (1,898 N·m) at 150 rpm for an optional gearbox, against 425 ft-lbf (576 N·m) at 325 rpm without it. It is an option, so it is not part of the base machine.
Haas gives 13,660 lb (6,196.2 kg) and a pallet of 178 × 90 × 98 in (452 × 229 × 249 cm) for both domestic and export shipping. These are shipping figures, so ask Haas for the installed dimensions when planning the floor.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.