The Haas Automation ST-25LY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,400 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas ST-25LY: 30 hp long-bed Y-axis lathe, 10 in chuck, 42.5 in (1,080 mm) of Z, ± 2 in Y travel, BMT65 live tools at 4,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,400 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 12,360 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 10 in (254 mm) |
| Max Swing | 21 in (533 mm) |
| Max Turning Diameter | 11.75 in (298 mm) |
| Max Turning Length | 42.5 in (1,080 mm) |
| Bar Capacity | 3 in (76 mm) |
| X-Axis Travel | 8.4 in (213 mm) |
| Y-Axis Travel | ± 2 in (± 51 mm) |
| Z-Axis Travel | 42.5 in (1,080 mm) |
| Rapid Traverse X | 472 ipm (12 m/min) |
| Rapid Traverse Y | 472 ipm (12 m/min) |
| Rapid Traverse Z | 945 ipm (24 m/min) |
| Max Thrust X | 4,100 lbf (18,238 N) |
| Max Thrust Y | 2,300 lbf (10,231 N) |
| Max Thrust Z | 5,100 lbf (22,686 N) |
| Spindle Nose | A2-6 |
| Spindle Motor Power | 30 hp (22.4 kW) |
| Max Spindle Speed | 3,400 rpm |
| Spindle Torque | 300 ft-lbf @ 500 rpm (407 N·m @ 500 rpm) |
| Spindle Bore | 3.5 in (88.9 mm) |
| C Axis Speed | 60 rpm |
| C Axis Max Rating | 5 hp (3.7 kW) |
| C Axis Positioning | 0.01 ° |
| C Axis Brake Diameter | 13.9 in (353 mm) |
| C Axis Brake Holding Torque | 250 ft-lbf (339 N·m) |
| C Axis Control Type | Interpolated Motion and Positioning |
| Turret Stations | 12 |
| Turret Od Vs Id Tools | Any Combination (will vary with turret) |
| Turret Boring Bar Rear Clearance | 4 in (102 mm) |
| Live Tool Speed | 4,000 rpm |
| Live Tooling | BMT65 |
| Coolant Capacity | 55 gal (208 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 70 A |
| Electrical High | 440 VAC 3-phase, 35 A |
| Shipping Domestic Pallet | 190 × 90 × 90 in (483 × 229 × 229 cm) |
| Shipping Export Pallet | 190 × 90 × 90 in (483 × 229 × 229 cm) |
| Machine Weight | 12,360 lb (5,606 kg) |
According to secondary market equipment benchmarks for November 2026, the Haas Automation ST-25LY is estimated between $45,500 and $91,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
Only at the spindle. The ST-25LY has a 10 in (254 mm) chuck, 3 in (76 mm) of bar capacity, 30 hp (22.4 kW), 300 ft-lbf (407 N·m) at 500 rpm and a 3,400 rpm maximum. The ST-20LY has an 8.3 in (210 mm) chuck, 2.5 in (64 mm) of bar capacity, 20 hp (14.9 kW), 150 ft-lbf (203 N·m) and 4,000 rpm. Travels, turning diameter and live-tool speed match.
The main spindle runs to 3,400 rpm, with peak torque of 300 ft-lbf (407 N·m) at 500 rpm. Live tools on the BMT65 turret run to 4,000 rpm. The C axis, used for positioning and for interpolated milling, turns at up to 60 rpm.
According to secondary market equipment benchmarks for November 2026, the Haas Automation ST-25LY is estimated between $45,500 and $91,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
The spec table for this model has no sub-spindle rows. Plan on turning and milling one side of the part in the main chuck across 42.5 in (1,080 mm) of Z, and handling the second side as its own operation.
Either 220 VAC three-phase at 70 A or 440 VAC three-phase at 35 A. Compressed air: 4 scfm at 100 psi (113 L/min at 6.9 bar), with 80 psi (5.5 bar) as the minimum pressure and 3/8 in for both hose and coupler. The machine weighs 12,360 lb (5,606 kg).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.