The Haas Automation ST-35LY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,200 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas ST-35LY: Y-axis lathe with ± 2 in (± 51 mm) of Y, 62.5 in (1,588 mm) between centers, 13.75 in turning diameter and a 40 hp A2-8 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,200 RPM |
| Spindle Motor Rating | 40.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 13,820 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 12 in (305 mm) |
| Max Swing | 21 in (533 mm) |
| Max Turning Diameter | 13.75 in (349 mm) |
| Max Turning Length | 62.5 in (1,588 mm) |
| Bar Capacity | 4 in (102 mm) |
| Distance Between Centers | 62.5 in (1,588 mm) |
| X-Axis Travel | 9.4 in (239 mm) |
| Y-Axis Travel | ± 2 in (± 51 mm) |
| Z-Axis Travel | 62.5 in (1,588 mm) |
| Rapid Traverse X | 472 ipm (12 m/min) |
| Rapid Traverse Y | 472 ipm (12 m/min) |
| Rapid Traverse Z | 945 ipm (24 m/min) |
| Max Thrust X | 4,100 lbf (18,238 N) |
| Max Thrust Y | 2,300 lbf (10,231 N) |
| Max Thrust Z | 5,100 lbf (22,686 N) |
| Spindle Nose | A2-8 |
| Spindle Motor Power | 40 hp (29.8 kW) |
| Max Spindle Speed | 3,200 rpm |
| Spindle Torque | 425 ft-lbf @ 325 rpm (576 N·m @ 325 rpm) |
| Spindle Torque Optional Gearbox | 1,400 ft-lbf @ 150 rpm (1,898 N·m @ 150 rpm) |
| Spindle Bore | 4.62 in (117.3 mm) |
| C Axis Speed | 60 rpm |
| C Axis Max Rating | 5 hp (3.7 kW) |
| C Axis Positioning | 0.01 ° |
| C Axis Brake Diameter | 13.9 in (353 mm) |
| C Axis Brake Holding Torque | 250 ft-lbf (339 N·m) |
| Turret Stations | 12 |
| Turret Od Vs Id Tools | Any Combination (will vary with turret) |
| Turret Boring Bar Rear Clearance | 4 in (102 mm) |
| Coolant Capacity | 55 gal (208 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 70 A |
| Electrical High | 440 VAC 3-phase, 35 A |
| Shipping Domestic Pallet | 202 × 90 × 92 in (513 × 229 × 234 cm) |
| Shipping Export Pallet | 202 × 90 × 92 in (513 × 229 × 234 cm) |
| Machine Weight | 13,820 lb (6,268 kg) |
According to secondary market equipment benchmarks for November 2026, the Haas Automation ST-35LY is estimated between $52,500 and $102,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $814 / month.
According to secondary market equipment benchmarks for November 2026, the Haas Automation ST-35LY is estimated between $52,500 and $102,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $814 / month.
The C axis runs at up to 60 rpm with a maximum rating of 5 hp (3.7 kW) and positions to 0.01°. Its brake is 13.9 in (353 mm) in diameter and has 250 ft-lbf (339 N·m) of holding torque. That holding torque is the limit to respect when milling or drilling far from the centreline with the spindle clamped.
The ST-28LY turns 11.75 in (298 mm) in diameter and 42.5 in (1,080 mm) in length, with ± 2 in (± 51 mm) of Y travel. The ST-35LY turns 13.75 in (349 mm) and 62.5 in (1,588 mm) with the same Y travel. Chuck size, bar capacity, spindle power, torque and maximum speed are the same on both.
A programmable tailstock with a #4 Morse taper is standard. For extra-long parts, or for machining a part face, Haas offers a steady rest provision as an option. Distance between centers is 62.5 in (1,588 mm). The table lists no tailstock thrust for this model.
Electrical supply is three-phase, 70 A at 220 VAC or 35 A at 440 VAC. Air demand is 4 scfm at 100 psi (113 L/min at 6.9 bar) with at least 80 psi (5.5 bar) at the machine, through a 3/8 in hose and coupler. It ships at 13,820 lb (6,268 kg) on a 202 × 90 × 92 in (513 × 229 × 234 cm) pallet.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.