The Haas Automation TL-2 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 1,800 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TL-2 toolroom lathe: 48 in (1,219 mm) between centers, 16 in (406 mm) turning diameter, 10 hp spindle to 1,800 rpm, single-phase option.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 1,800 RPM |
| Spindle Motor Rating | 10.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,480 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Swing Over Front Apron | 20 in (508 mm) |
| Swing Over Cross Slide | 11 in (279 mm) |
| Chuck Optional | 8 in (203 mm) |
| Max Turning Diameter | 16 in (406 mm) |
| Max Turning Diameter With 4 Station Turret | 8 in (203 mm) |
| Max Turning Length | 48 in (1,219 mm) |
| Distance Between Centers | 48 in (1,219 mm) |
| X-Axis Travel | 8 in (203 mm) |
| Z-Axis Travel | 48 in (1,219 mm) |
| Rapid Traverse | 450 ipm (11.4 m/min) |
| Max Thrust X | 3,894 lbf (17,321 N) |
| Max Thrust Z | 1,947 lbf (8,661 N) |
| Spindle Nose | A2-5 |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Motor Power | 10 hp (7.5 kW) |
| Max Spindle Speed | 1,800 rpm |
| Spindle Torque | 108 ft-lbf @ 355 rpm (146 N·m @ 355 rpm) |
| Spindle Bore | 2.3 in (58 mm) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Single Phase | 220 VAC 1-phase, 40 A |
| Electrical Low | 220 VAC 3-phase, 25 A |
| Electrical High | 440 VAC 3-phase, 13 A |
| Shipping Domestic Pallet | 108.5 × 68.5 × 83 in (276 × 174 × 211 cm) |
| Shipping Export Pallet | 108.5 × 68.5 × 83 in (276 × 174 × 211 cm) |
| Machine Weight | 4,480 lb (2,032 kg) |
| Shipping Domestic Pallet With Conveyor | 135 × 70 × 83 in (342 × 178 × 211 cm) |
| Shipping Export Pallet With Conveyor | 135 × 70 × 83 in (342 × 178 × 211 cm) |
| Machine Weight With Conveyor | 5,380 lb (2,440 kg) |
According to secondary market equipment benchmarks for November 2026, the Haas Automation TL-2 is estimated between $39,500 and $79,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $612 / month.
According to secondary market equipment benchmarks for November 2026, the Haas Automation TL-2 is estimated between $39,500 and $79,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $612 / month.
Maximum turning diameter is 16 in (406 mm), or 8 in (203 mm) with the four-station turret. Swing over the front apron is 20 in (508 mm), but swing over the cross slide is 11 in (279 mm), and a part long enough to sit over the slide has to clear that smaller figure.
According to secondary market equipment benchmarks for November 2026, the Haas Automation TL-2 is estimated between $39,500 and $79,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $612 / month.
Both have 48 in (1,219 mm) of Z travel and a 10 hp (7.5 kW) spindle with 108 ft-lbf (146 N·m) at 355 rpm. The TL-2 turns up to 16 in (406 mm) and runs to 1,800 rpm. The TL-2P is listed with a 6.5 in (165 mm) chuck, an 8 in (203 mm) maximum turning diameter and 3,000 rpm.
One of three: 220 VAC single-phase at 40 A, 220 VAC three-phase at 25 A, or 440 VAC three-phase at 13 A. Minimum air pressure is 80 psi (5.5 bar) through a 3/8 in hose and coupler.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.