The Haas Automation VF-10/50 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 7,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas VF-10/50: 120 x 32 x 30 in travels, 50-taper geared spindle, 340 ft-lbf at 700 rpm, 4,000 lb table load. Specs checked against Haas.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 7,500 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | CT or BT 50 |
| Table / Platter / Chuck Size | 120 × 28 in (3,048 × 711 mm) |
| Max Table Load Capacity | 4,000 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 31,600 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 120 in (3,048 mm) |
| Y-Axis Travel | 32 in (813 mm) |
| Z-Axis Travel | 30 in (762 mm) |
| Spindle Nose To Table Max | 35 in (889 mm) |
| Spindle Nose To Table Min | 5 in (127 mm) |
| Spindle Motor Power | 30 hp (22.4 kW) |
| Max Spindle Speed | 7,500 rpm |
| Spindle Torque | 340 ft-lbf @ 700 rpm (460 N·m @ 700 rpm) |
| Spindle Drive | 2-Speed Gearbox |
| Spindle Taper | CT or BT 50 |
| Spindle Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Liquid Cooled |
| Table Size | 120 × 28 in (3,048 × 711 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4.92 in (125 mm) |
| T Slots | 5 |
| Max Table Load | 4,000 lb (1,814 kg) |
| Max Cutting Feedrate | 360 ipm (9.1 m/min) |
| Rapid Traverse X | 360 ipm (9.1 m/min) |
| Rapid Traverse Y | 600 ipm (15.2 m/min) |
| Rapid Traverse Z | 600 ipm (15.2 m/min) |
| Max Thrust X | 3,400 lbf (15,124 N) |
| Max Thrust Y | 4,100 lbf (18,238 N) |
| Max Thrust Z | 5,600 lbf (24,910 N) |
| Tool Changer Type | SMTC |
| Tool Capacity | 30+1 |
| Max Tool Diameter | 4 in (102 mm) |
| Max Tool Diameter Adjacent Empty | 10 in (254 mm) |
| Max Tool Length | 16 in (406 mm) |
| Max Tool Weight | 30 lb (13.6 kg) |
| Tool To Tool | 4.2 s |
| Chip To Chip | 6.3 s |
| Coolant Capacity | 95 gal (360 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 70 A |
| Electrical High | 440 VAC 3-phase, 35 A |
| Shipping Domestic Pallet | 288 × 102 × 132 in (732 × 260 × 336 cm) |
| Shipping Export Crate | 288 × 105 × 133.5 in (732 × 267 × 339 cm) |
| Machine Weight | 31,600 lb (14,334 kg) |
| Shipping Domestic Pallet With Ec Option | 288 × 102 × 140 in (732 × 260 × 356 cm) |
| Shipping Export Crate With Ec Option | 288 × 105 × 141 in (732 × 267 × 359 cm) |
| Machine Weight With Ec Option | 31,600 lb (14,334 kg) |
According to secondary market equipment benchmarks for November 2026, the Haas Automation VF-10/50 is estimated between $58,500 and $104,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $907 / month.
A CT or BT 50 spindle driven through a 2-speed gearbox, rated 30 hp (22.4 kW) and 340 ft-lbf (460 N·m) at 700 rpm, with a 7,500 rpm maximum. Cooling is liquid and the bearings are lubricated by air / oil injection.
Only at the spindle and in weight. The VF-10/40 uses CT40, BT40 or HSK-A63 tooling at up to 8,100 rpm with 90 ft-lbf (122 N·m) at 2,000 rpm and ships at 30,100 lb (13,654 kg). The VF-10/50 ships at 31,600 lb (14,334 kg). Both travel 120 × 32 × 30 in (3,048 × 813 × 762 mm) and both are limited to 360 ipm (9.1 m/min) on X.
The VF-11/50 has the same 120 in (3,048 mm) of X with 40 in (1,016 mm) of Y, and the VF-12/50 has 150 in (3,810 mm) of X with 32 in (813 mm) of Y. Both use the 50-taper spindle listed at 340 ft-lbf (460 N·m) at 700 rpm.
X rapids at 360 ipm (9.1 m/min) and the maximum cutting feedrate is 360 ipm (9.1 m/min). Y and Z rapid at 600 ipm (15.2 m/min), which is about 67% faster than X. Thrust is 3,400 lbf (15,124 N) in X.
288 × 102 × 132 in (732 × 260 × 336 cm) on a domestic pallet, or 288 × 105 × 133.5 in (732 × 267 × 339 cm) in an export crate, at 31,600 lb (14,334 kg). Those figures describe the load on the truck, so the installed layout should be taken from Haas's installation documents.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.