The Haas Automation VM-14/50 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas VM-14/50: 150 x 40 x 30 in (3,810 x 1,016 x 762 mm) travels, 60 hp 50-taper geared spindle, 350 ft-lbf at 900 rpm, 10,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 60.0 kW |
| Spindle Taper Interface | CT or BT 50 |
| Table / Platter / Chuck Size | 150 × 28 in (3,810 × 711 mm) |
| Max Table Load Capacity | 4,000 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 36,300 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 150 in (3,810 mm) |
| Y-Axis Travel | 40 in (1,016 mm) |
| Z-Axis Travel | 30 in (762 mm) |
| Spindle Nose To Table Max | 34 in (864 mm) |
| Spindle Nose To Table Min | 4 in (102 mm) |
| Spindle Motor Power | 60 hp (44.7 kW) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Torque | 350 ft-lbf @ 900 rpm (475 N·m @ 900 rpm) |
| Spindle Drive | 2-Speed Gearbox |
| Spindle Taper | CT or BT 50 |
| Spindle Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Coolant Jacket |
| Table Size | 150 × 28 in (3,810 × 711 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4.92 in (125 mm) |
| T Slots | 5 in X and 30 in Y |
| Max Table Load | 4,000 lb (1,814 kg) |
| Max Cutting Feedrate | 360 ipm (9.1 m/min) |
| Rapid Traverse X | 360 ipm (9.1 m/min) |
| Rapid Traverse Y | 600 ipm (15.2 m/min) |
| Rapid Traverse Z | 600 ipm (15.2 m/min) |
| Max Thrust X | 4,100 lbf (18,238 N) |
| Max Thrust Y | 4,100 lbf (18,238 N) |
| Max Thrust Z | 5,600 lbf (24,910 N) |
| Tool Changer Type | SMTC |
| Tool Capacity | 30+1 |
| Max Tool Diameter | 4 in (102 mm) |
| Max Tool Diameter Adjacent Empty | 8 in (203 mm) |
| Max Tool Diameter Extra Large Adjacent Empty | 10 in (254 mm) |
| Max Tool Length | 16 in (406 mm) |
| Max Tool Weight | 30 lb (13.6 kg) |
| Tool To Tool | 4.2 s |
| Chip To Chip | 6.3 s |
| Coolant Capacity | 95 gal (360 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 105 A |
| Electrical High | 440 VAC 3-phase, 53 A |
| Shipping Domestic Pallet | 343 × 110 × 130 in (871 × 280 × 331 cm) |
| Shipping Export Crate | 343 × 110 × 134.5 in (871 × 280 × 342 cm) |
| Machine Weight | 36,300 lb (16,466 kg) |
According to secondary market equipment benchmarks for November 2026, the Haas Automation VM-14/50 is estimated between $57,000 and $101,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $884 / month.
Shops whose cuts need torque. The VM-14/50 is rated 60 hp (44.7 kW) and 350 ft-lbf (475 N·m) at 900 rpm with CT or BT 50 tooling. The VM-14 is rated 30 hp (22.4 kW) and 90 ft-lbf (122 N·m) at 2,000 rpm, with a 12,000 rpm top speed. Travels, table and the 36,300 lb (16,466 kg) listed weight are the same, so the decision rests on cutter size and material.
Y travel: 40 in (1,016 mm) on the VM-14/50 against 32 in (813 mm) on the VM-12/50. X travel of 150 in (3,810 mm), Z travel of 30 in (762 mm), the 150 × 28 in (3,810 × 711 mm) table and the 60 hp (44.7 kW) spindle rating are the same on both.
Haas lists the spindle drive as a 2-speed gearbox. It gives the spindle a low range for torque, 350 ft-lbf (475 N·m) at 900 rpm, and a high range that reaches 10,000 rpm. A direct-drive spindle of the same motor size would have to choose between the two.
Spindle nose to table is 4 in (102 mm) at the bottom of Z and 34 in (864 mm) at the top, over 30 in (762 mm) of Z travel. The tool changer accepts tools up to 16 in (406 mm) long, so check the longest tool plus the tallest part and fixture against the 34 in figure.
Haas lists a domestic pallet of 343 × 110 × 130 in (871 × 280 × 331 cm), an export crate of 343 × 110 × 134.5 in (871 × 280 × 342 cm) and a weight of 36,300 lb (16,466 kg). Those figures are for transport and rigging. They do not describe the floor area the installed machine needs.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.