The Haas Automation VM-3 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas VM-3 mold machine: 40 x 26 x 25 in (1,016 x 660 x 635 mm) travels, 54 x 24 in table, 4,000 lb load, 12,000 rpm spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | CT or BT 40 |
| Table / Platter / Chuck Size | 54 × 24 in (1,372 × 610 mm) |
| Max Table Load Capacity | 4,000 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 40 in (1,016 mm) |
| Y-Axis Travel | 26 in (660 mm) |
| Z-Axis Travel | 25 in (635 mm) |
| Spindle Nose To Table Max | 29.2 in (742 mm) |
| Spindle Nose To Table Min | 4.2 in (107 mm) |
| Spindle Motor Power | 30 hp (22.4 kW) |
| Max Spindle Speed | 12,000 rpm |
| Spindle Torque | 90 ft-lbf @ 2,000 rpm (122 N·m @ 2,000 rpm) |
| Spindle Drive | Inline Direct-Drive |
| Spindle Taper | CT or BT 40 |
| Table Size | 54 × 24 in (1,372 × 610 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 3.94 in (100 mm) |
| T Slots | 13 in Y and 6 in X |
| Max Table Load | 4,000 lb (1,814 kg) |
| Max Cutting Feedrate | 500 ipm (12.7 m/min) |
| Rapid Traverse | 710 ipm (18 m/min) |
| Max Thrust X | 4,100 lbf (18,238 N) |
| Max Thrust Y | 4,100 lbf (18,238 N) |
| Max Thrust Z | 4,100 lbf (18,238 N) |
| Tool Changer Type | SMTC |
| Tool Capacity | 30+1 |
| Max Tool Diameter | 2.5 in (64 mm) |
| Max Tool Diameter Adjacent Empty | 5 in (127 mm) |
| Max Tool Length | 13 in (330 mm) |
| Max Tool Weight | 12 lb (5.4 kg) |
| Tool To Tool | 2.8 s |
| Chip To Chip | 3.6 s |
| Coolant Capacity | 55 gal (208 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 70 A |
| Electrical High | 440 VAC 3-phase, 35 A |
| Shipping Domestic Pallet | 156 × 102 × 105 in (397 × 260 × 267 cm) |
| Shipping Export Pallet | 164 × 91.5 × 101 in (417 × 233 × 257 cm) |
| Shipping Domestic Pallet With 50 Plus 1 Smtc | 156 × 102 × 125 in (397 × 260 × 318 cm) |
| Shipping Export Pallet With 50 Plus 1 Smtc | 164 × 92 × 101 in (417 × 233 × 257 cm) |
| Machine Weight With 50 Plus 1 Smtc | 15,600 lb (7,077 kg) |
According to secondary market equipment benchmarks for November 2026, the Haas Automation VM-3 is estimated between $59,500 and $105,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $922 / month.
No. X travel is 40 in (1,016 mm) and the table is 54 in (1,372 mm) long, so the spindle covers only part of the length. Y travel is 26 in (660 mm) over a table 24 in (610 mm) deep, so depth is fully covered. The uncut length at the ends is still usable for clamps and fixtures.
X travel and the taper choices. The VM-5 has 50 in (1,270 mm) of X where the VM-3 has 40 in (1,016 mm), on the same 54 × 24 in (1,372 × 610 mm) table with the same 26 in (660 mm) of Y and 25 in (635 mm) of Z. The VM-5 lists CT40, BT40 or HSK-A63; the VM-3 lists CT or BT 40. Spindle speed, power, table load, feedrate and rapids are the same in Haas's figures.
The VM-3-50 has a CT or BT 50 spindle with 60 hp (44.7 kW), 350 ft-lbf (475 N·m) at 900 rpm and a 10,000 rpm top speed. The VM-3 has 30 hp (22.4 kW), 90 ft-lbf (122 N·m) at 2,000 rpm and 12,000 rpm. Travels are identical, and the VM-3-50 table is listed at 54 × 24.5 in (1,372 × 622 mm). Choose by the cut: the VM-3 for small tools at high speed, the VM-3-50 for large cutters in solid blocks.
According to secondary market equipment benchmarks for November 2026, the Haas Automation VM-3 is estimated between $59,500 and $105,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $922 / month.
Each tool can be up to 13 in (330 mm) long and 12 lb (5.4 kg). Diameter is limited to 2.5 in (64 mm) with a full magazine and 5 in (127 mm) when the adjacent pockets are empty. The changer holds 30+1 tools and needs 2.8 s tool to tool, 3.6 s chip to chip.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.