The Hwacheon Hi-M G1 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the SIEMENS-828D or FANUC 0i-MF. It offers working travels of 750 x 600 x 350 mm, a top spindle speed of 24,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon Hi-M G1 high-speed VMC: 24,000 rpm HSK-E40 spindle, 750 x 600 x 350 mm travels, 750 x 620 mm table, 16 tools, SIEMENS or FANUC control.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | SIEMENS-828D or FANUC 0i-MF |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 750 mm |
| Y-Axis Travel | 600 mm |
| Z-Axis Travel | 350 mm |
| Maximum Spindle Speed | 24,000 RPM |
| Spindle Motor Rating | 9.5 kW |
| Spindle Taper Interface | HSK-E40 (BT-30 opt.) |
| Table / Platter / Chuck Size | 750 x 620 mm (29.5 x 24.4 in) |
| Max Table Load Capacity | 400 kg |
| Automatic Tool Changer (ATC) | 16 Tool Stations |
| Approx. Machine Weight | 4,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 750 mm (29.5 in) |
| Y Axis Travel | 600 mm (23.6 in) |
| Z Axis Travel | 350 mm (13.8 in) |
| Distance Spindle Nose To Table | 100 ~ 450 mm (3.9 ~ 17.7 in) |
| Table Size | 750 x 620 mm (29.5 x 24.4 in) |
| Max Table Load | 400 kg (882 lb) |
| T Slots | 16 x 125 mm, 5 slots (width x pitch: 0.63 x 4.9 in) |
| Max Spindle Speed | 24,000 rpm |
| Spindle Motor Power | 9.5 kW (12.7 hp) |
| Spindle Taper | HSK-E40 (BT-30 opt.) |
| Spindle Drive | Built-in |
| Spindle Lubrication | Grease |
| Spindle Cooling | Jacket cooling (oil cooler) |
| Rapid Traverse Xyz | 25 / 25 / 20 m/min (984 / 984 / 787 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (up to 394 ipm) |
| Tool Capacity | 16 |
| Max Tool Diameter | Ø63 mm (Ø2.5 in) |
| Max Tool Length | 200 mm (7.9 in) |
| Max Tool Weight | 3 kg (6.6 lb) |
| Tool Selection | Fixed address |
| Power Requirement | 35 kVA |
| Power Supply | SIEMENS version: 380V, 60Hz; FANUC version: 220V, 60Hz |
| Air Supply | 6 ~ 7 kg/cm² |
| Spindle Coolant Tank | 20 L (5 US gal) |
| Dust Collector Height | 2,710 mm (106.7 in) |
| Machine Height | 2,520 mm (99.2 in) |
| Machine Dimensions | 2,165 x 2,575 mm (85.2 x 101.4 in) (length x width) |
| Machine Weight | 4,800 kg (10,582 lb) |
| CNC Control | SIEMENS-828D or FANUC 0i-MF |
According to secondary market equipment benchmarks for November 2026, the Hwacheon Hi-M G1 is estimated between $60,500 and $108,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $938 / month.
Both share the 24,000 rpm, 9.5 kW (12.7 hp) HSK-E40 spindle, the 750 x 620 mm (29.5 x 24.4 in) table and 16 tools. The Hi-M G1 can be ordered with SIEMENS-828D or FANUC 0i-MF control. The Hwacheon Hi-M G1 Pro comes with FANUC 0i-MF only and adds C3-grade ball screws, 0.05 µm linear scales and HTDC thermal displacement control as standard.
The Hwacheon Hi-M760 has the same 750 x 600 x 350 mm travels, table and 24,000 rpm HSK-E40 spindle, but rates the spindle at 11.2 kW (15.0 hp) against 9.5 kW (12.7 hp) on the G1 and cools it with water. The Hwacheon Hi-M760 ships with SIEMENS-828D and offers FANUC 0i-MF as an option.
16 tools, selected by fixed address. Each can be up to Ø63 mm (Ø2.5 in) in diameter, 200 mm (7.9 in) long and 3 kg (6.6 lb). Spindle taper is HSK-E40, with BT-30 available as an option for shops already tooled in that system.
35 kVA. The SIEMENS version runs on 380V, 60Hz and the FANUC version on 220V, 60Hz. Air supply is 6 to 7 kg/cm². Allow 2,165 x 2,575 mm (85.2 x 101.4 in) of floor and 2,520 mm (99.2 in) of height, or 2,710 mm (106.7 in) at the dust collector.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.