The Hwacheon Hi-M2000 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the SIEMENS-828D (FANUC 0i-MF opt.). It offers working travels of 2000 x 1300 x 350 mm, a top spindle speed of 24,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon Hi-M2000 VMC: 2,000 x 1,300 mm table, 2,000 x 1,300 x 350 mm travels, 24,000 rpm BT-30 spindle, 500 kg load, SIEMENS-828D control.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | SIEMENS-828D (FANUC 0i-MF opt.) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,000 mm |
| Y-Axis Travel | 1,300 mm |
| Z-Axis Travel | 350 mm |
| Maximum Spindle Speed | 24,000 RPM |
| Spindle Motor Rating | 6.0 kW |
| Spindle Taper Interface | BT-30 |
| Table / Platter / Chuck Size | 2,000 x 1,300 mm (78.7 x 51.2 in) |
| Max Table Load Capacity | 500 kg |
| Automatic Tool Changer (ATC) | 16 Tool Stations |
| Approx. Machine Weight | 12,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,000 mm (78.7 in) |
| Y Axis Travel | 1,300 mm (51.2 in) |
| Z Axis Travel | 350 mm (13.8 in) |
| Distance Spindle Nose To Table | 100 ~ 450 mm (3.9 ~ 17.7 in) (90 ~ 490 mm (3.5 ~ 19.3 in) opt.) |
| Table Size | 2,000 x 1,300 mm (78.7 x 51.2 in) |
| Max Table Load | 500 kg (1,102 lb) |
| T Slots | 16 x 180 mm, 7 slots (width x pitch: 0.63 x 7.1 in) |
| Max Spindle Speed | 24,000 rpm |
| Spindle Motor Power | 6 kW (8.0 hp) (15 kW (20.1 hp) opt.) |
| Spindle Taper | BT-30 |
| Spindle Cooling | Coolant cooling (water chiller) |
| Rapid Traverse Xyz | 15 / 15 / 15 m/min (591 / 591 / 591 ipm) |
| Spindle Drive | Built-in |
| Spindle Lubrication | Grease |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (up to 394 ipm) |
| Tool Capacity | 16 |
| Max Tool Diameter | Ø16 mm (Ø0.6 in) |
| Max Tool Length | 200 mm (7.9 in) |
| Max Tool Weight | 3 kg (6.6 lb) |
| Tool Selection | Fixed Address |
| CNC Control | SIEMENS-828D (FANUC 0i-MF opt.) |
| Power Requirement | 40 kVA; with 15 kW spindle 50 kVA |
| Power Supply | 380V, 60Hz (FANUC: 220V, 60Hz) |
| Air Supply | 0.5~0.7MPa x 690Nℓ/min |
| Machine Height | 2,450 mm (96.5 in) |
| Machine Dimensions | 5,341 x 2,982 mm (210.3 x 117.4 in) (length x width) |
| Machine Weight | 12,000 kg (26,455 lb) |
According to secondary market equipment benchmarks for November 2026, the Hwacheon Hi-M2000 is estimated between $92,500 and $166,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,434 / month.
The Hi-M2000 has 2,000 mm (78.7 in) of X and a 2,000 x 1,300 mm (78.7 x 51.2 in) table rated at 500 kg (1,102 lb). The Hwacheon Hi-M1500 has a 1,500 x 1,300 mm (59.1 x 51.2 in) table rated at 300 kg (661 lb). Both run a 24,000 rpm BT-30 spindle of 6 kW (8.0 hp), 15 kW (20.1 hp) optional.
Z travel is 350 mm (13.8 in) with the spindle nose 100 ~ 450 mm (3.9 ~ 17.7 in) from the table as standard. An option shifts the range to 90 ~ 490 mm (3.5 ~ 19.3 in). Subtract fixture height and tool length, up to 200 mm (7.9 in), to see what part height fits.
Rapid traverse is 15 m/min (591 ipm) on X, Y and Z, and cutting feed runs up to 10,000 mm/min (394 ipm). On long cutting passes the feed rate decides the cycle; on parts with many short repositioning moves the rapid rate does.
40 kVA, or 50 kVA with the 15 kW spindle, on 380V, 60Hz for SIEMENS-828D or 220V, 60Hz for FANUC 0i-MF. Air supply is 0.5~0.7MPa x 690Nℓ/min. The machine occupies 5,341 x 2,982 mm (210.3 x 117.4 in), stands 2,450 mm (96.5 in) high and weighs 12,000 kg (26,455 lb).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.