The Hwacheon L3 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the FANUC 0i-MF Plus. It offers working travels of 3000 x 1800 x 500 mm, a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon L3: 3,000 x 1,800 mm table rated 3,000 kg, 3,000 x 1,800 x 500 mm travels, BT-40 spindle to 20,000 rpm, 30 tools (40 opt.).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | FANUC 0i-MF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,000 mm |
| Y-Axis Travel | 1,800 mm |
| Z-Axis Travel | 500 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 12.0 kW |
| Spindle Taper Interface | ISO#40, 7/24 Taper (BT-40) |
| Table / Platter / Chuck Size | 3,000 x 1,800 mm (118.1 x 70.9 in) |
| Max Table Load Capacity | 3,000 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 29,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 1,800 mm (70.9 in) |
| Z Axis Travel | 500 mm (19.7 in) |
| Width Between Columns | 2,050 mm (80.7 in) |
| Distance Spindle Nose To Table | 100 ~ 600 mm (3.9 ~ 23.6 in) |
| Table Size | 3,000 x 1,800 mm (118.1 x 70.9 in) |
| Max Table Load | 3,000 kg (6,614 lb) |
| T Slots | 22 x 140 mm, 13 slots (width x pitch: 0.87 x 5.5 in) |
| Max Spindle Speed | 12,000 rpm (12K) / 20,000 rpm (20K) |
| Spindle Motor Power | 12K: 18.5 / 11 kW (24.8 / 14.8 hp); 20K: 37 / 18.5 kW (49.6 / 24.8 hp) |
| Spindle Taper | ISO#40, 7/24 Taper (BT-40) |
| Spindle Bearing Bore | Ø70 mm (Ø2.8 in) |
| Cutting Feed Rate | 1 ~ 20,000 mm/min (up to 787 ipm) |
| Tool Shank | MAS-403 BT-40 |
| Pull Stud | MAS-P40T-1 (45°) |
| Tool Capacity | 30 (40 opt.) |
| Max Tool Diameter | Ø75 / Ø150 mm (Ø3.0 / Ø5.9 in), with / without adjacent tools |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 8 kg (17.6 lb) |
| Tool Selection | Memory random (fixed address opt.) |
| Atc Drive | Servo motor (magazine / swing arm) |
| Axis Motors Xyz | 6 / 4 / 4 kW (8.0 / 5.4 / 5.4 hp) |
| Coolant Pump Motor | 1.1 kW (1.5 hp) |
| Power Requirement | 45 kVA |
| Power Supply | 220V, 60Hz |
| Air Supply | 0.5 ~ 0.7 MPa x 690 Nℓ/min |
| Rapid Traverse Xyz | 20 / 24 / 36 m/min (787 / 945 / 1,417 ipm) |
| Machine Height | 3,280 mm (129.1 in) |
| Machine Dimensions | 9,630 x 4,420 mm (379.1 x 174.0 in) (length x width) |
| Machine Weight | 29,000 kg (63,933 lb) |
| CNC Control | FANUC 0i-MF Plus |
According to secondary market equipment benchmarks for November 2026, the Hwacheon L3 is estimated between $83,000 and $147,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,287 / month.
The Hwacheon L2 has 1,100 mm (43.3 in) wide tables of 2,500 or 3,000 mm length rated 2,000 kg (4,409 lb). The L3 has one 3,000 x 1,800 mm (118.1 x 70.9 in) table rated 3,000 kg (6,614 lb), 1,800 mm (70.9 in) of Y travel and weighs 29,000 kg (63,933 lb).
Rapids are 20 m/min (787 ipm) in X, 24 m/min (945 ipm) in Y and 36 m/min (1,417 ipm) in Z. Cutting feed runs up to 20,000 mm/min (787 ipm). The axis motors are 6 / 4 / 4 kW (8.0 / 5.4 / 5.4 hp) on X, Y and Z.
Two BT-40 spindles: 12,000 rpm (12K) rated 18.5 / 11 kW (24.8 / 14.8 hp), or 20,000 rpm (20K) rated 37 / 18.5 kW (49.6 / 24.8 hp). Both have a Ø70 mm (Ø2.8 in) bearing bore and take MAS-403 BT-40 shanks.
The SIRIUS-1750 has a 3,200 x 1,750 mm (126.0 x 68.9 in) table rated 10,000 kg (22,046 lb), a BBT-50 spindle at 12,000 or 15,000 rpm rated 30 / 25 kW (40.2 / 33.5 hp) and weighs 31,000 kg (68,343 lb). The L3 is rated 3,000 kg (6,614 lb) with BT-40 tooling, so heavy castings and 50-taper roughing point to the SIRIUS-1750.
A floor area of 9,630 x 4,420 mm (379.1 x 174.0 in), 3,280 mm (129.1 in) of height and a foundation for 29,000 kg (63,933 lb). Supply is 45 kVA at 220V, 60Hz, and air at 0.5 to 0.7 MPa x 690 Nℓ/min.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.