The Hwacheon M4-5AX is an industrial-grade 5-Axis Machining Centers powered by the Fanuc 31i-B5. It offers working travels of 950 x 1000 x 650 mm, a top spindle speed of 8,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon M4-5AX five-axis machining center: BBT-50 spindle to 55 kW, Ø800 x 630 mm table for 1,200 kg, 950 x 1,000 x 650 mm travels.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Fanuc 31i-B5 |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 950 mm |
| Y-Axis Travel | 1,000 mm |
| Z-Axis Travel | 650 mm |
| Maximum Spindle Speed | 8,000 RPM |
| Spindle Motor Rating | 8.0 kW |
| Spindle Taper Interface | BBT-50 (opt. CAT-50, HSK-A100, SK-50) |
| Table / Platter / Chuck Size | Ø800 x 630 mm (Ø31.5 x 24.8 in) |
| Max Table Load Capacity | 1,200 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 28,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 950 mm (37.4 in) |
| Y Axis Travel | 1,000 mm (39.4 in) |
| Z Axis Travel | 650 mm (25.6 in) |
| A Axis Range | ±120° |
| C Axis Range | 360° |
| Distance Spindle Nose To Table | 180 ~ 830 mm (7.1 ~ 32.7 in) |
| Table Size | Ø800 x 630 mm (Ø31.5 x 24.8 in) |
| Max Table Load | 1,200 kg (2,646 lb) |
| T Slots | 18 mm width x 100 mm pitch, 5 slots |
| Max Spindle Speed | 8,000 rpm (8K high-torque) / 12,000 rpm (12K) |
| Spindle Motor Power | 8K: 55 / 30 kW (73.8 / 40.2 hp); 12K: 30 / 25 kW (40.2 / 33.5 hp) |
| Spindle Taper | BBT-50 (opt. CAT-50, HSK-A100, SK-50) |
| Spindle Drive | Built-in motor |
| Spindle Bearing Diameter | Ø100 mm (Ø3.9 in) (8K opt. Ø120 mm) |
| Spindle Bearing Lubrication | Oil-jet |
| Spindle Cooling | Jacket cooling (oil cooler) |
| Rapid Traverse Xyz | 36 / 36 / 30 m/min (1,417 / 1,417 / 1,181 ipm) |
| Rapid Traverse Rotary | 20 / 30 rpm (A / C) |
| Tool Capacity | 30 (opt. 60) |
| Tool Selection | Fixed address |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Pull Stud | 90° type |
| Power Requirement | 125 kVA |
| Coolant Tank Capacity | 550 L |
| Machine Height | 4,252 mm (167.4 in) |
| Machine Dimensions | 5,126 x 6,336 mm (201.8 x 249.4 in) (L x W); 60-tool: 5,126 x 6,570 mm (201.8 x 258.7 in) |
| Machine Weight | 28,000 kg (61,729 lb); 60-tool: 28,500 kg (62,831 lb) |
| CNC Control | Fanuc 31i-B5 |
According to secondary market equipment benchmarks for November 2026, the Hwacheon M4-5AX is estimated between $120,000 and $248,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,860 / month.
The 8K is the high-torque spindle: 8,000 rpm and 55 / 30 kW (73.8 / 40.2 hp), on Ø100 mm (Ø3.9 in) bearings with Ø120 mm as an option. The 12K runs to 12,000 rpm and is rated 30 / 25 kW (40.2 / 33.5 hp). Both take BBT-50 tooling, with CAT-50, HSK-A100 and SK-50 as options.
The M3-5AX is a 40-taper machine with spindles from 14,000 to 24,000 rpm, a Ø700 x 540 mm (Ø27.6 x 21.3 in) table rated 800 kgf (1,764 lb) and a 40-tool magazine. The M4-5AX moves to BBT-50, spindles of 8,000 or 12,000 rpm, a Ø800 x 630 mm (Ø31.5 x 24.8 in) table rated 1,200 kg (2,646 lb) and 30 tools with a 60-tool option.
Tools up to 400 mm (15.7 in) long and 20 kg (44 lb). The magazine holds 30 tools, or 60 with the option, and uses fixed-address selection. The pull stud is a 90° type, so check that existing BBT-50 holders carry matching studs before sharing them with this machine.
According to secondary market equipment benchmarks for November 2026, the Hwacheon M4-5AX is estimated between $120,000 and $248,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,860 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.