The Hwacheon MEGA+120 is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF Plus / (SIEMENS 828D). a top spindle speed of 5 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon MEGA+120 flat-bed lathe: Ø1,200 mm swing, 3,000 to 6,000 mm between centres, bores up to Ø320 mm, 45-55.5 kW, 625 mm X travel.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF Plus / (SIEMENS 828D) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 625 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 3,000 mm |
| Maximum Spindle Speed | 5 RPM |
| Spindle Motor Rating | 45.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 14,600 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Swing Over Bed | Ø1,200 mm (Ø47.24 in) |
| Swing Over Cross Slide | Ø840 mm (Ø33.07 in) |
| Max Turning Diameter | Ø1,200 mm (Ø47.24 in) over bed; Ø820 mm (Ø32.28 in) over cross slide |
| Distance Between Centers | 3,000 / 4,000 / 5,000 / 6,000 mm (118.11 / 157.48 / 196.85 / 236.22 in) |
| Chuck Size | 18 in |
| X Axis Travel | 625 mm (24.61 in) |
| Z Axis Travel | 3,000 / 4,000 / 5,000 / 6,000 mm (118.11 / 157.48 / 196.85 / 236.22 in) |
| Spindle Nose | A2-15 (Ø155, Ø255 bore) / A2-20 (Ø320 bore) |
| Max Spindle Speed | 5 ~ 750 rpm (Ø155 bore) / 5 ~ 650 rpm (Ø255) / 5 ~ 400 rpm (Ø320) |
| Spindle Bore | Ø155 / Ø255 / Ø320 mm (Ø6.1 / Ø10.04 / Ø12.59 in) |
| Spindle Speed Ranges | Auto 3 steps |
| Spindle Motor Power | FANUC: 45 / 37 kW (60.3 / 49.6 hp); SIEMENS: 55.5 / 37 kW (74.4 / 49.6 hp) |
| Rapid Traverse Xz | 6 / 6 m/min (236.22 / 236.22 ipm) X / Z; 6 / 5 m/min (236.22 / 196.85 ipm) on the 6000 bed |
| Cutting Feed Rate | 3,000 / 3,000 mm/min (118.11 / 118.11 ipm) X / Z |
| Tool Post | Manual 4-way (square) tool post |
| Turret Stations | 4 tool faces |
| Tool Shank Size | □32 mm |
| Tailstock | Built-in type |
| Tailstock Quill Diameter | Ø200 mm (Ø7.87 in) |
| Tailstock Quill Taper | MT No.6 |
| Tailstock Quill Travel | 260 mm (10.24 in) |
| Bed Width | 700 mm (27.56 in) |
| Bed Length | 5,410 / 6,410 / 7,410 / 8,410 mm (212.99 / 252.36 / 291.73 / 331.1 in) |
| Bed Type | 1 Bed, 2 Ways |
| Coolant Tank | 220 / 270 / 320 / 370 L (58 / 71 / 85 / 98 gal) |
| Power Requirement | 76 kVA (TR 80 kVA); 84 kVA (TR 85 kVA) on the 6000 bed; FANUC: 220 V, 60 Hz / SIEMENS: 380 V, 60 Hz |
| Machine Dimensions | 6,640 / 7,640 / 8,640 / 9,640 x 3,050 x 2,490 mm (261.42 / 300.79 / 340.16 / 379.53 x 120.08 x 98.03 in) L x W x H |
| Machine Weight | 14,600 / 16,100 / 17,600 / 19,600 kg (32,187 / 35,494 / 38,801 / 43,210 lb) for the 3000 / 4000 / 5000 / 6000 beds |
| CNC Control | FANUC 0i-TF Plus / (SIEMENS 828D) |
According to secondary market equipment benchmarks for November 2026, the Hwacheon MEGA+120 is estimated between $51,000 and $99,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
Ø155 mm (Ø6.1 in) on an A2-15 nose gives the highest speed, 750 rpm. Ø255 mm (Ø10.04 in), also A2-15, runs to 650 rpm. Ø320 mm (Ø12.59 in) uses an A2-20 nose and runs to 400 rpm. Choose the smallest bore that passes the stock, because each step up costs speed.
The table rates the spindle at 45 / 37 kW (60.3 / 49.6 hp) with the FANUC 0i-TF Plus and 55.5 / 37 kW (74.4 / 49.6 hp) with the SIEMENS 828D. The continuous figure is the same; the short-time rating is higher on the SIEMENS version. The supply voltage differs too: 220 V, 60 Hz for FANUC, 380 V, 60 Hz for SIEMENS.
The MEGA+140 swings Ø1,400 mm (Ø55.12 in), has a 32 in chuck and offers centre distances up to 10,000 mm (393.7 in). Spindle bores, speeds and motor ratings are the same on the MEGA+140 and the MEGA+120. The MEGA+120 has an 18 in chuck and 625 mm (24.61 in) of X travel.
According to secondary market equipment benchmarks for November 2026, the Hwacheon MEGA+120 is estimated between $51,000 and $99,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.