The Hwacheon MP+3710 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the FANUC 31i-B. It offers working travels of 10650 x 4500 x 1000 mm, a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon MP+3710: 10,000 x 3,100 mm table rated 40 t, 10,650 mm X travel, 4,500 mm Y, BT-50 spindle to 4,000 rpm at 37 kW, 40 to 120 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | FANUC 31i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 10,650 mm |
| Y-Axis Travel | 4,500 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 37.0 kW |
| Spindle Taper Interface | 7 / 24 Taper BT-50 |
| Table / Platter / Chuck Size | 10,000 x 3,100 mm (393.7 x 122.05 in) |
| Max Table Load Capacity | 40 kg |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Approx. Machine Weight | 130,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 10,650 mm (419.29 in) |
| Y Axis Travel | 4,500 mm (177.17 in) |
| Z Axis Travel | 1,000 mm (39.37 in) |
| W Axis Travel | 1,100 mm (43.31 in) |
| Width Between Columns | 3,700 mm (145.67 in) |
| Distance Spindle Center To Table | -270 ~ 1,830 mm (-10.63 ~ 72.05 in) |
| Distance Column To Spindle Center | 625 mm (24.61 in) |
| Table Size | 10,000 x 3,100 mm (393.7 x 122.05 in) |
| Max Table Load | 40 t (88,184 lb) |
| T Slots | 28H7 x 200 mm, 17 slots (width x pitch) |
| Max Spindle Speed | 4,000 rpm |
| Spindle Motor Power | 37 / 30 kW (49.92 / 40.23 hp) |
| Ram Size | 400 mm (15.75 in) |
| Spindle Taper | 7 / 24 Taper BT-50 |
| Rapid Traverse Xyzw | 16 / 16 / 12 / 3 m/min (630 / 630 / 472 / 118 ipm) |
| Cutting Feed Rate Xyzw | 10 / 10 / 10 / 3 m/min (394 / 394 / 394 / 118 ipm) |
| Tool Capacity | 40 (60, 90, 120 opt.) |
| Max Tool Diameter | Ø130 / Ø250 mm (Ø5.12 / Ø9.84 in), with / without adjacent tools |
| Max Tool Length | 400 mm (15.75 in) |
| Max Tool Weight | 25 kg (55 lb) |
| Coolant Pump Motor | 2.5 kW (3.35 hp), ram |
| Coolant Tank | 800 L (211 US gal) |
| Power Requirement | 130 kVA |
| Power Supply | 380V, 60Hz |
| Air Supply | 5~7 kg/cm² x 690 Nℓ/min |
| Machine Height | 7,780 mm (306.3 in) |
| Machine Dimensions | 26,300 x 10,800 mm (1,035.43 x 425.2 in) (length x width) |
| Machine Weight | 130,000 kg (286,601 lb) |
| CNC Control | FANUC 31i-B |
According to secondary market equipment benchmarks for November 2026, the Hwacheon MP+3710 is estimated between $94,500 and $168,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,465 / month.
The table is 10,000 x 3,100 mm (393.7 x 122.05 in) and X travel is 10,650 mm (419.29 in), so a part close to the full table length can be machined in one setup. The table is rated 40 t (88,184 lb).
Table length, load and weight. The MP+3706 has a 6,000 x 3,100 mm (236.22 x 122.05 in) table rated 30 t (66,138 lb) and weighs 100,000 kg (220,462 lb). The MP+3710 has a 10,000 x 3,100 mm (393.7 x 122.05 in) table rated 40 t (88,184 lb) and weighs 130,000 kg (286,601 lb). Spindle and magazine are the same.
The MP+3708G has a shorter but wider 8,000 x 3,400 mm (314.96 x 133.86 in) table, also rated 40 t (88,184 lb), with a 35 / 22 kW (46.91 / 29.49 hp) spindle and 32 tools. The MP+3710 is the choice for length, with its 10,000 mm (393.7 in) table, 37 / 30 kW (49.92 / 40.23 hp) and 40 tools.
A 7 / 24 taper BT-50 spindle to 4,000 rpm rated 37 / 30 kW (49.92 / 40.23 hp), carried on a 400 mm (15.75 in) ram. Tools may be up to Ø250 mm (Ø9.84 in) with the adjacent pockets empty, 400 mm (15.75 in) long and 25 kg (55 lb).
A floor area of 26,300 x 10,800 mm (1,035.43 x 425.2 in), 7,780 mm (306.3 in) of height and a foundation for 130,000 kg (286,601 lb). Power is 130 kVA at 380V, 60Hz, and air is 5 to 7 kg/cm² at 690 Nℓ/min.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.