The Hwacheon Hi-M760 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the SIEMENS-828D (FANUC 0i-MF opt.). It offers working travels of 750 x 600 x 350 mm, a top spindle speed of 24,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon Hi-M760 VMC: 24,000 rpm 11.2 kW water-cooled HSK-E40 spindle, 750 x 600 x 350 mm travels, 750 x 620 mm table, 16 tools, SIEMENS-828D.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | SIEMENS-828D (FANUC 0i-MF opt.) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 750 mm |
| Y-Axis Travel | 600 mm |
| Z-Axis Travel | 350 mm |
| Maximum Spindle Speed | 24,000 RPM |
| Spindle Motor Rating | 11.2 kW |
| Spindle Taper Interface | HSK-E40 |
| Table / Platter / Chuck Size | 750 x 620 mm (29.5 x 24.4 in) |
| Max Table Load Capacity | 400 kg |
| Automatic Tool Changer (ATC) | 16 Tool Stations |
| Approx. Machine Weight | 4,760 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 750 mm (29.5 in) |
| Y Axis Travel | 600 mm (23.6 in) |
| Z Axis Travel | 350 mm (13.8 in) |
| Distance Spindle Nose To Table | 100 ~ 450 mm (3.9 ~ 17.7 in) |
| Table Size | 750 x 620 mm (29.5 x 24.4 in) |
| Max Table Load | 400 kg (882 lb) |
| T Slots | 16 x 125 mm, 5 slots (width x pitch: 0.63 x 4.9 in) |
| Max Spindle Speed | 24,000 rpm |
| Spindle Motor Power | 11.2 kW (15.0 hp) |
| Spindle Taper | HSK-E40 |
| Spindle Bearing Bore | Ø70 mm (Ø2.8 in) |
| Spindle Cooling | Water-cooled |
| Rapid Traverse Xyz | 25 / 25 / 20 m/min (984 / 984 / 787 ipm) |
| Coolant Pump Motor | 1.1 kW (1.5 hp) |
| Spindle Drive | Built-in |
| Spindle Lubrication | Grease |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (up to 394 ipm) |
| Tool Capacity | 16 |
| Max Tool Diameter | Ø16 mm (Ø0.6 in) |
| Max Tool Length | 200 mm (7.9 in) |
| Max Tool Weight | 3 kg (6.6 lb) |
| Tool Selection | Fixed Address |
| CNC Control | SIEMENS-828D (FANUC 0i-MF opt.) |
| Power Requirement | 30 kVA |
| Air Supply | 6-7 kgf/cm² |
| Machine Height | 2,500 ~ 2,730 mm (98.4 ~ 107.5 in) |
| Machine Dimensions | 2,115 x 2,333 mm (83.3 x 91.9 in) (length x width) |
| Machine Weight | 4,760 kg (10,494 lb) |
The price estimate for the Hwacheon Hi-M760 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hwacheon-hi-m760#price; the request is passed to Hwacheon or an authorised dealer.
Same travels, table and 24,000 rpm HSK-E40 spindle, but the Hi-M760 spindle is rated 11.2 kW (15.0 hp) and water cooled, where the Hwacheon Hi-M G1 has 9.5 kW (12.7 hp) and an oil-cooled jacket. The Hi-M760 also needs less power, 30 kVA against 35 kVA for the Hwacheon Hi-M G1, and weighs 4,760 kg (10,494 lb).
SIEMENS-828D as standard, with FANUC 0i-MF available as an option. If your programmers and post-processors are set up for one of the two, specify it at order, since the control also decides the operator interface on the shop floor.
The magazine holds 16 tools, selected by fixed address. The table lists a maximum tool diameter of Ø16 mm (Ø0.6 in), a maximum length of 200 mm (7.9 in) and a maximum weight of 3 kg (6.6 lb). Check the diameter limit with Hwacheon if you plan to run larger cutters.
A 30 kVA electrical supply and 6-7 kgf/cm² of air. The machine occupies 2,115 x 2,333 mm (83.3 x 91.9 in), stands 2,500 ~ 2,730 mm (98.4 ~ 107.5 in) high and weighs 4,760 kg (10,494 lb).
