The Hyundai-WIA F960B is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. a top spindle speed of 8,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA F960B: 2,450 × 960 × 850 mm travels, 2700 × 950 mm table, 4,500 kg load, geared BBT50 spindle with 776 / 657 N·m at up to 8,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 8,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 |
| Table / Platter / Chuck Size | 2700 × 950 mm (106.3 × 37.4 in) |
| Max Table Load Capacity | 4,500 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 2,450 mm (96.5 in) |
| Y-Axis Travel | 960 mm (37.8 in) |
| Z-Axis Travel | 850 mm (33.5 in) |
| Max Spindle Speed | 8,000 rpm |
| Spindle Taper | BBT50 |
| Rapid Traverse | X/Y/Z: 16 / 16 / 20 m/min (630 / 630 / 787 ipm) |
| Max Table Load | 4,500 kg (9,921 lb) |
| Spindle Torque | 776 / 657 N·m (572.4 / 484.6 ft-lbf) |
| Spindle Motor Power | 22 / 18.5 kW (29.5 / 24.8 hp) |
| Spindle Drive | GEAR BOX |
| Tool Capacity | 20 tools |
| Table Size | 2700 × 950 mm (106.3 × 37.4 in) |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA F960B is estimated between $96,500 and $197,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,496 / month.
Travels are 2,450 mm (96.5 in) in X, 960 mm (37.8 in) in Y and 850 mm (33.5 in) in Z. The table is 2700 × 950 mm (106.3 × 37.4 in) and is rated for 4,500 kg (9,921 lb). Because the table is longer than the X travel, the ends of a full-length part sit outside the reach of the spindle.
A BBT50 spindle driven through a gear box, with a maximum speed of 8,000 rpm. WIA lists power as 22 / 18.5 kW (29.5 / 24.8 hp) and torque as 776 / 657 N·m (572.4 / 484.6 ft-lbf). The combination favours heavy cuts at low speed over high-rpm finishing.
20 tools. WIA's table shows no larger magazine option for this model. On jobs with many hole sizes and thread sizes that number runs out quickly, so write the tool list for the intended parts before deciding.
16 m/min (630 ipm) on X and Y and 20 m/min (787 ipm) on Z. On a 2,450 mm (96.5 in) X axis, a full-length rapid move takes noticeably longer than on a smaller machine, which matters for hole patterns spread along the table.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.